Liv Rove 3 DD trekking bike 2019
Fork: SR Suntour NEX HLO 700C, stroke 63 mm, lockable from the crown
Cranks: PROWHEEL Burner-201P, 48/38/28 tooth converters
Middle composition: SR Suntour encapsulated
Derailleur: Shimano Acera, 8 speeds
Derailleur: Shimano Tourney
Gear levers: Shimano EF500, gears 3x8
Cassette: Shimano HG31, 11-34 teeth
Chain: KMC Z8
Brakes: TX-122, rims, type V-brake5
Brake Levers: Shimano EF500
Rims: Giant GX02 entwined set
Hubs: Giant GX02 entwined set
Wires: Giant GX02 braided set
Tires : Giant Crosscut, 700x38, 30 TPI, defect protection
Pedals: Plastic / metal
Handlebars: Giant Sport, 31.8 mm
stem: Giant Sport, aluminum
Saddle: Liv Connect Comfort
Seatpost: Giant Sport, 27.2 mm
Model year | 2019 |
Gears | 3x8 |
Groupset | Shimano Acera, Shimano Tourney |
Material | aluminium |
Brakes | V-brakes |
product ID | 77756 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews