Kellys Avenue 90 28 ", model 2020
frame size 430mm / 480mm
fork SR SUNTOUR CR-8V, 50mm, coil spring (threaded steerer 28.6mm)
semi -integrated main composition
medium cartridge composition ( 116mm )
PROWHEEL cranks (38) - length 170mm
shifting SHIMANO Nexus SL-7S20 Revoshift
number of transfers 7
pinion SHIMANO for internal hub 21T
KMC Z6 chain (102 links)
brakes APSE Artek V-brake / SHIMANO foot brake
TEKTRO brake levers
brake cables DRIVING Force SCS (SlickCableSystem)
SHIMANO Dynamo Nexus C3000 / SHIMANO C3000 Inter-7 hubs (36 holes)
rims KLS Draft 622x21 (36 holes / eyelets)
string steel
tires SCHWALBE Citizen - K-Guard 47-622 (28x1.75) ReflectiveLine
stem KALLOY - adjustable - diam 25.4mm / length 90mm
handlebars steel RiseBar - diam 25.4mm / width 610mm
KLS Wave 2Density ergonomic handles
seatpost suspension - diam 27.2mm / length 350mm
saddle SELLE ROYAL Freedom Royalgel
pedals NonSlip - plastic
BÜCHEL Urban LED front lighting
rear light BÜCHEL Champs Elysees LED - standlight
fenders RPZ
accessories carrier, stand, bell
Model year | 2020 |
Gears | 1x7 |
Groupset | Other |
Material | aluminium |
Brakes | V-brakes |
product ID | 89476 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews