Kellys Avenue 20, model 2019
frame size 430mm / 480mm
fork hi-ten unicrown (threaded steerer 28.6mm)
main composition TH semi-integrated
medium cartridge composition (118mm)
cranks PROWHEEL (38) - length 170mm
shifting SHIMANO Nexus SL-3S42E Revoshift
number of gears 3
pinion SHIMANO for internal hub 21T
chain KMC Z6 (102 links)
brakes APSE Artek V-brake / SHIMANO pedal brake
TEKTRO brake levers
brake cables DRIVING Force SCS (SlickCableSystem)
alloy hubs / SHIMANO Nexus 3C41 Inter-3 (36 holes)
rims KELLYS Event 559x19 (36 holes)
string steel
tires Mitas Flash 47-622 (28x1.75) ReflectiveLine
stem ZOOM - diam 25.4mm / 25° / length 80mm
handlebar steel RiseBar - diam 25.4mm / width 610mm
handles KLS Wave 2Density ergonomic
seatpost KALLOY Uno - diam 27.2mm / length 350mm
saddle SELLE ROYAL Freedom Royalgel
pedals VP NonSlip - plastic
front lighting BÜCHEL Retro battery LED
rear lighting BÜCHEL Champs Elysees LED
fenders RPZ
accessories dynamo set, carrier, stand, bell
Model year | 2019 |
Gears | 1x3 |
Groupset | Other |
Material | aluminium |
Brakes | V-brakes |
product ID | 70789 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews