Fuji FEATHER, model 2021, gray
Fork: Fuji flat-crown chromoly, 1 threaded steerer
Cranks: Alloy track-style, 46T
Middle composition: Sealed cartridge bearing
Pedals: Alloy platform
Cassette: 16T fixed cog / 16T freewheel
Chain: KMC S1
Wheels: Alex double wall rims, 32h, high-flange alloy sealed bearing hubs, stainless spokes
Tires: Vittoria Zaffiro, 25-622
Brakes: Promax alloy
Brake levers: Tange 1 threaded
Head composition: Alloy Track-style drop bar
Handlebars: Alloy quill, - 18 degree rise
Stem: Velo perforated tape
Grips: Velo Retro 5-rivet
Saddle: Alloy aero, 27.2mm
Seatpost: 9.89 kg
Model year | 2021 |
Gears | 1x1 |
Groupset | Other |
Material | steel |
Brakes | Road rim brakes |
product ID | 118894 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews