Zeroflats anti-blemish lotion
Zeroflats milk is made of nanoparticles of latex and organic granulate, it clots in the event of a defect and creates a flexible and permanent connector. Zeroflats serve as replacements for souls. In the event of a puncture, you do not have to get off the bike, the milk will immediately repair the puncture.Precautions: Avoid contact with eyes and clothing during installation. Zero flats contains ammonia (< 0.2%), which can cause eye irritation. Use safety glasses. If Zero flats gets in your eyes, wash them with clean water. Zero flats is soluble in water, do not let it dry if it gets on clothing, and wash it as soon as possible.
Installation: To seal 1 wheel, you need 60 ml of Zeroflats milk. If you use Tubeless, TNT or Tubeless Ready tires, you only need a workshop pump or CO2. Place the tire on the rim and inflate it so that the bead of the tire fits into the rim. Then unscrew the valve and pour 60 ml of Zeroflats and inflate to the desired pressure. When installing regular tires, the procedure is the same, but you will need a compressor to inflate.
Zeroflats can be applied either through the valve or before putting on the tires
|
Thanks to Zeroflats, you can reduce the weight of the wheel by up to 200 g
|
Zeroflats recommends using Schwalbe, Continental, Kenda tires
|
Zero Flats can be blown with CO2 canisters
|
Capacity | 1000 ml |
Recommended dosage | 26" 60 ml, 27.5" 90 ml, 27.5"+ 120 ml, 29" 120 ml, fatbike 180 ml |
product ID | 3115 |
comment Reviews