Kellys Convoy rear rack, 26"- 28"
Kellys Convoy rear rack
Aluminium rack for MTB/CROSS bicycles.|
Suitable for disc and V-brakes
|
|
With spring
|
|
Holder for a light or reflector
|
| Colour | black |
| Material composition | aluminium |
| Max carrying capacity | 25 kg |
| product ID | 15131 |
•
Good day, what is the difference between this carrier and the carrier https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/force-zadny-nosic-26-28-p10703.html. I see that in the description this one is up to 29", and the Force is up to 28, is there actually a parent there, in the pictures they seem to be the same. I use the Force at https://www.crussis.sk/eshop-krosovy-elektrobicykel- one-oli-cross-8-7-s-2022-ram-20.html, I have a problem getting fenders there. I would like to know if this kellys is bigger. Thanks in advance for your reply.
Automatically translated
•
Dobrý deň,
Oba nosiše sú v podstate rovnako veľké. Force označuje priemer ráfikov a Kellys priemer plášťov (na 29" plášte sa používajú 28" ráfiky). Blatníky pre Váš rozmer plášťov ktoré sú v špecifikácií bicykla sa žiaľ do takéhoto typu nosiča žiaľ nezmestia.
•
Dobry den, napriek tomu ze je to v popise vyrobku predsa len by som sa rad opytal, ak teda mate skusenost. Mam bicykel KTM ULTRA Race 29,(http://www.thebikelist.co.uk/ktm/ultra-race-29-2014) a chcel by som vediet ci je naozaj dany nosic kompatibilny, nakolko viem ze u vacsiny nosic je to casto krat dost komplikovane pokial ide o montaz na bicykel s 29"" kolesami. A taktiez by som sa chcel spytat ci je mozne na nosic pripnut aj brasne inych vyrobcov ako Kellys.
Vopred dakujem za odpoved
Ondro
•
Dobrý deň,
Je ťažké posúdiť či bude daný nosič kompatibilný na Váš bicykel keď ani bicykel a ani nosič nemáme, aby sme to mohli skúsiť. Každopádne mal by byť univerzálny a teda mal by sedieť. Najlepšie by bolo nosič priamo vyskúšať na Vašom bicykli.
Ak máte cestu okolo, môžete nosič objednať s doručením k nám do Hrádku a pokiaľ by Vám nesedel, nemuseli by ste ho zakúpiť. Prípadne ak nemáte cestu okolo, zakúpený tovar (nepoužitý, nepoškodený) je možné do 30 dní vrátiť a buď Vám zašleme iný tovar alebo vrátime peniaze.
S taškami na nosič od iných výrobcov by nemal byť problém.
•
edit
Hello, I have a kellys soot 90 bike.
( https://www.mtbiker.sk/shop/bicykle/gravel-a-cyklokros/kellys-soot-90-model-2021.html?gclid=Cj0KCQjwxYOiBhC9ARisANiEIfYNa9085W4FgeojwuSV_nzNal8gA6YnRaIOwtGCr4mf3hno_uOoxEMaAk8_EALw_wcB )
Please, is it possible to carry children on this bike with the Kellys Convoy rear rack, 26"-29"? (15kg) Will it handle the bicycle frame?
Thank you very much
•
Dobry den,
vyrobca max. nosnost ramu blizsie nespecifikuje - kontaktovali sme ho so ziadostou o overenie a upresnenie. Budem Vas informovat akonahle budeme mat blizsie info.
•
edit
Hello.
Can this carrier be mounted on the Kellys Tygon R50 (29") ebike?
Where do the ends of the two horizontal arms go? There are no holes for that on the frame. Or do they just wrap around the tube of the seat post and attach themselves to each other?
I'm thinking about buying one, because now I have a carrier that is mounted on the seat post, but since I replaced it with a suspension, the assembly has too little room for it under the suspension mechanism.
Thank you in advance for your reply.
•
Dobry den,
zial pokial ram nedisponuje montaznymi otvormi, tak nosic mozne osadit nie je.
Kolko priestoru Vam zostava na sedlovke?
•
edit
Na sedlovky sa mi zmesti nosic urceny na ruru sedlovky, problem je, ze je to uz tak nizko, ze pri prepruzeni mi drhne o koleso
•
Dobry den,
hmm, rozumiem.. Riesenim by prip. mohol byt nosic uchytavany priamo na zadnu stavbu bicykla, vybornu spatnu vazbu mame od zakaznikov napr. na tento nosic od Thule, jedna sa sice o drahsi model, avsak spracovanie je typicky pre znacku Thule na skvelej urovni - https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/thule-tour-rack-nosic-p8439.html#description.
•
Dakujem za odpoved.
Rad by sa spytal na tento:
https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/basil-universal-cargo-mik-a-mik-in-side-zadny-nosic-p259425.html
Dal by sa pouzit, aj ked zadna stavba nema kruhovy, ale zaobleny trojuholnikovy profil?
•
Dobry den,
tento nosic Basil sa upevnuje taktiez do montaznych otvorov na rame - takze plati rovnaky problem ako sme riesili vyssie, pokial ram nedisponuje takymito montaznymi otvormi, tak ho zial uchytit mozne nie je
•
Pardon. Z tej fotky sa mi zdalo, ze je tam akasi objimka, ktora sa uchytava "okolo" ramu zadnej stavby.
•
Good day, I want to ask if this carrier is compatible with https://www.mtbiker.sk/shop/bicykle/krosove-bicykle/damske/gt-transeo-4-0-women-2017-teal-purple-trekingovy -bicykel.html and also what child seat would you recommend for it? Thank you
Automatically translated
•
Dobrý deň,
bicykel má prípravu na montáž nosiča, takže bude kompatibilný. V prípade sedačky, treba vyberať model určený na nosič, napríklad https://www.mtbiker.sk/shop/prislusenstvo/detske-sedacky-a-voziky/hamax-zenith-cyklosedacka-zadna.html
•
Hello, can a child seat be attached to this carrier? For example this one https://www.mtbiker.sk/shop/prislusenstvo/detske-sedacky-a-voziky/sedacka-koolah-zadna-na-nosic.html , which you also have in the offer? Thank you for your response.
Automatically translated
•
Dobrý deň,
áno, aj Vami zmienenú detskú sedačku naň môžete pripevniť
•
Hello, I bought this mount, but I don't have side mounting holes on the rear frame, only one in the middle under the seat. I found with other carriers that there is a "reduction" for such attachment. I want to ask if you happen to have these spacers so that I don't have to drill into the frame.
Well thank you
•
Dobrý deň,
žiaľ takúto "redukciu" nemáme v ponuke a nevieme zohnať. Pokiaľ nieje nosič použitý a poškodený, je možné ho vrátiť, či vymeniť za iný, napr. : https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/point-nosic-za-sedlovku-s-bocnicami.html . Pre výmenu/vrátenie tovaru je potrebné vyplniť formulár a následne nám tovar zaslať späť do Hrádku. Návod ako postupovať nájdete tu : http://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html
•
Hello.
Will the listed carrier be compatible with this bike? Thank you for your reply.
https://www.mtbiker.sk/shop/bicykle/krosove-bicykle/kellys-phanatic-10-28-bicykel-sage-green.html
•
Dobry den prajem,
ano, nosic by mal sadnut bez najmensich problemov
•
Hello, is there a possibility to attach a mudguard to the given carrier? Alternatively, a different combination of carrier + mudguard for a 29" mountain bike. Thank you for your reply. T
Automatically translated
•
Dobrý deň, bolo by dobré uviesť aj model bicykla aby sme vám vedeli lepšie poradiť aký blatník upevniť.
•
Dobrý deň, jedna sa o základný model specialized rockhopper 2019. Bike ma závity na nosic (na zadnej hornej vzpere a pri zadnom kolese). Avšak chýbajú závity na bežný blatník(ako to býva napr. u krosovych bikoch). Preto zisťujem, či je možnosť montáže aj priamo na nosič.
•
No čo som našiel tak možnosť uchytenia odrazky alebo svetla, blatník žiaľ nie.
•
Good day
I would like to ask if this carrier can be attached to a Clea 90 bicycle, if not what would it fit
thank you
•
Dobry den,
model Clea bol vyrobcom ponukany v roznych variantoch - pokial Vase prevedenie obsahuje na rame montazne otvory na nosic, tak s kompatibilitou problem nebude a nosic mozete pouzit.
•
Dobry den... tento nosic pisete do 28 ....bude sa dat namotovat na crussis 10.11. s 29 kolesami? dakujem za info
•
Dobry den, ktory model 10.11? Ak ide o celoodpruzeny bicykel tak nie. Ak ide o mestsky alebo trekingovy model tak pokial je sroubovacia priprava na rame tak by to malo byt mozne, ale kazdy ram je iny a nevieme to na 100% garantovat.
•
Jedna sa o e largo....vyzera ze to bude pasovať aj o co prisrubovat 😀
•
Ano vyzera ze by to mohlo pasovat.
•
No nepasoval.Maly bol.vratene
•
Dobry den,
dakujem velmi pekne za rychlu odpoved ! Cestu okolo asi tak skoro nebudem mat, ale skusim zrejme objednat a uvidim, pevne verim ze to bude pasovat
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
I evaluate after a long time of use and it is a very good and high-quality carrier for a great price. But I would be careful if you want to put side bags on the carrier. I recently bought an Ortlieb tasky model gravel pack. These are smaller bags (the volume of one bag is approx. 12.5 litres), which are intended for the front racks of bicycles, but it is not a problem to have them on the back rack as well.
Automatically translatedAnd when this carrier has only two lateral "struts" and one strut is so "curved" that in the end both struts end together. So your bag rests on the struts only at this one point. And the other end of the bag is "in the air" and nothing is leaning on it.
Carriers that have one more support, so the bag rests on both ends, or in the entire length.
I just want to say that in the case of loading bags and in rough terrain with more shocks, the bags on this stretcher can move more than if they rest on the stretcher on only one side. My bags are smaller, which is not a problem, but maybe with bigger bags it could be a problem. And mainly it would be a problem with bags that do not have or have only weak reinforcement, so they could also interfere with the wheel. So I would rather look at a carrier with more struts.
Great. It has proven itself fully loaded on a long trip. Easy to assemble, spacers for mounting on a bike with disc brakes included. Adjustable length and width of the mounts. ORTLIEB Back-Roller City bags hold well on it.
Automatically translatedFor the price, it has met expectations so far.. installation is one-of-a-kind, even if no reasonable instructions.. people may have a problem with it. A bit noisy when not loaded.
Automatically translatedNicely processed, fits like a glove on a 29" hardtail. I solved the fender with a plastic asssaver and two plastic pullers. I recommend.
Automatically translatedStrong, massive, practical, fits even on a 29" mountain bike. I wrapped the hard cardboard paper with tape and used it as a mudguard.
Automatically translatedSturdy, well made and quick and easy to mount on an electric mtb ?
Automatically translatedFits perfectly, assembly in 5 minutes and looks great.
Automatically translatedExcellent price/performance ratio, simple assembly
Automatically translatedmounted with a bag and fully assembled
Automatically translatedSo far so good, satisfaction
Automatically translatedNo negatives yet.
Automatically translatedfull purpose. without reservations.
Automatically translatedgreat satisfaction
Automatically translatedExcellent
Automatically translated