Shimano Claris FC-RS200 cranks, 175 mm, 2x8, 50/34T, square, with case
Shimano Claris FC-RS200 Crankset
Claris RS200 crankset with chainguard for square taper bottom brackets is designed for 7/8-speed drivetrains.| Groupset | Shimano Claris |
| Gears | 2x8 |
| Crank length | 175 mm |
| Number of teeth | 50/34T |
| Axle type | square type BB |
| Chainring bolt circle diameter | 110mm/110mm |
| Recommended BB | Shimano BB-UN26, length 110 mm |
| Weight | 1 246 g |
| Chain line | 43.5 mm |
| Q-factor | 150 mm |
| product ID | 87258 |
Dobrý deň , chcem sa spýtať na dostupnosť tichto kluk s prevodnikmi 46-34 z . Ďakujem
Dobrý deň,
žiaľ aktuálne je z týchto kľúk dostupný len tento variant s 50/34 z. prevodníkmi. Preveril som aj dostupnosť samostatného 46T prevodníka a žiaľ taktiež - aktuálne je dostupnosť úplne neznáma.
Hello, is it possible to get a separate 50T chainring?
Thank you.
Dobry den,
zial aktualne nedostupny - https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-prevodnik-50z-fc-2450-claris-cierny-p136368.html?preview
Hello, can you get only a separate 34T converter? Well thank you.
Automatically translated
Dobry den,
mozete pouzit akykolvek 8-rychlostny prevodnik s 5-ramennou roztecou 110 mm BCD, sadne tak napr.: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-fc-3550-sora-prevodnik-34t-110-mm.html.
Dobrý deň. Daná kľuka sa môže použiť v systéme 2*9? Ďakujem
Dobrý deň, žiaľ nie, prevodníky majú o niečo širšie zuby, s 9-rýchlostnými reťazami kompatibilné nebudú.
WARNING:
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this "user's manual" before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surrounding area. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Before riding your bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to get parts of your clothing caught in the chain while riding. Otherwise, you may fall off the bicycle.
CAUTION:
Be careful and do not touch the teeth of the sprockets. There is a risk of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

A foolproof classic that I've cycled thousands of kilometers through x countries with.
Automatically translatedOK. I changed 53/38 to 50/34-I am satisfied
Automatically translated