Shimano XT HB-M8210 front hub, Center Lock, 32 holes, 15x110 mm
The new DEORE XT HB-M8210-B front hub offers improved reliability and performance. Industrial bearings and new seal types ensure lower rolling resistance. This front hub is available in boost configuration (110x15mm) and traditional versions with 28 or 32 holes.
Type: MTB, Total package weight: 249g, 32 holes, Front, Black, 15mm, Mounting method: Thru Axle, Center Lock, Material: Aluminum
Disc mounting: Center Lock
Number of holes: 32 holes
Hub mounting: E-Thru
Placement: Front
Hub width (OLD): 110 mm
| Colour | black |
| Location | Front |
| Axle type | fixed "boost" |
| Nut | none |
| Brake disc installation | Center Lock (CL) |
| product ID | 352984 |
WARNING
Information on the installation, adjustment, and replacement of products not found in the user's manual can be obtained at the place of purchase or from a distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, thoroughly read this "user's manual" before use, follow it for proper use, and store it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to equipment and surroundings. Instructions are classified according to the degree of danger or damage that may occur in case of improper use of the product.
DANGER - Failure to follow instructions will result in death or serious injury.
WARNING - Failure to follow instructions could result in death or serious injury.
CAUTION - Failure to follow instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and suffer serious injury.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever may cause the wheel to fall off, etc., and may lead to serious injury due to a fall or collision.
- Before riding the bicycle, you should thoroughly check the hubs and make sure there are no cracks on the axles; if you find any unusual conditions, DO NOT USE the bicycle. This front hub is designed for downhill and freeride cycling. However, depending on riding conditions, cracks may form on the hub axle, which may result in axle failure. This can lead to an accident, which could result in serious injury or even death.
- This hub can only be used in combination with a special front fork and E-THRU. If used in combination with any other front fork or hub axle, the wheel may detach from the bicycle during riding, resulting in serious injuries.
- When mounting the front wheel to a front suspension fork, always follow the instructions in the front suspension fork manual. The securing method, as well as the tightening torque of the front wheel, vary depending on the type of front suspension fork used. If you do not follow the instructions, the front wheel may fall out, resulting in serious injury.
- Check that the quick release lever does not interfere with the disc brake rotor even when fully engaged. If the quick release lever is on the side of the disc brake rotor, it may interfere with the disc brake rotor, which is dangerous. If the quick release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
































































There are currently no reviews