Shimano XTR FC-M9200 175mm crankset, 1x12, without chainring
The FC-M9200 crankset represents an evolution of Shimano's iconic HOLLOWTECH II process, utilizing cold forging for hollow crank arms. Strong enough for optimal power transfer, available in lengths from 160 to 175mm, and compatible with SM-CR96 chainrings (30-38 teeth), the FC-M9200 meets all requirements for lightweight and reliable cross country cranks.
| Groupset | Shimano XTR, Shimano XT |
| Gears | 1x12 |
| Type | MTB |
| Crank length | 175 mm |
| Crank type | HOLLOWTECH II |
| Crankset gears | 1 x 12 speed |
| Crank range | without converters |
| Crankset determination | MTB |
| Q-Factor | 170 mm |
| Chain line | 55 mm |
| product ID | 350989 |
Dobry den, kedze tieto nove XTR kluky maju chainline 55mm a offset prevodnika 0mm, mozem ich pouzit na moj Specialized Epic Evo, ktory ma chainline 52mm a dal by som tam prevodnik s offsetom 3mm, aby som to posunul cele dolava, viac k ramu?
Dobrý deň, jo, presne tak, s offsetovym prevodnikom dosiahnete nizsiu retazovu linku.
WARNING
For assistance with installation, adjustment and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must be always followed in order to prevent personal injury, physical damage to equipment and pollution of environment. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that there are no cracks in the crank arms. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful not to touch the gear teeth. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.






























































