Shimano XTR SM-CR96 chainring, 32T, 1x12
Shimano XTR SM-CR96 chainring
Lightweight direct mount chainring equipped with Dynamic Chain Engagement technology for reliable chain retention. The reinforced chainring is impact-resistant, compatible with XTR cranks, and available in sizes from 28 to 36 teeth, in two-tooth increments.| Colour | black |
| Groupset | Shimano XTR |
| Number of teeth | 32t |
| Converter mounting | Shimano direct mount |
| Weight | 64 g |
| product ID | 350980 |
Dobry den, tak som dal na tieto kluky XTR FC-M9120-1 tento novy XTR 32z prevodnik a obaval som sa, ze bude o dalsie 3 mm posunuty von od ramu, co aj presne tak je. Predtym som mal prevodnik od ramu 7mm, teraz je 10mm a retaz sa dost krizi, ked to dam na 51z kazetu na najvyssi pastorok 51z. Pasovat to na kluku pasuje, ale kedze mam chainline 52mm a tento prevodnik je na kluky s 55mm chainline, tak prevodnik mate vysunuty o tie 3mm dalej od ramu...
Skusal som dat tento prevodnik opacne, vonkajsou stranou dovnutra a potom je to OK, vzdialenost od ramu je 7mm.
Mozem to takto pls. pouzit? Dakujem vopred za promptnu odpoved.
Dobry den,
tak to ma mrzi Zo skusenosti byval vzdy offset pri Shimano DM klukach dany klukami, nie prevodnikom, zrejme uz pri tomto novom modeli vyrobca pozmenil kovanie a celkovy dizajn uchytenia
Prevodnik samozrejme mozete vratit, mrzia nas vzniknute komplikacie - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html#vratenie-a-reklamacie.
Otocenia prevodnika neodporucame - zuby su dizajnovane fungovat 100%-ne len v jednom smere, netrufam si odhadnut ako to ovplyvni hlucnost systemu, pripade "nepadavost" retaze a pod.
Dobry den,
tieto nove kluky maju uvedene "Chainline 55 mm". Pisete , ze prevodnik by mal sadnut aj na starsie XTR kluky. Ja ma kluky XTR FC-M9120-1 na rame Specialized Epic Evo, ktory ma "Chainline" ale 52 mm. Bude tento prevodnik potom OK na 9120-kovych klukach?
S pozdravom,
Dobry den, pri Shimano DM klukach je offset dany klukou, nie samotnym prevodnikom (preto Shimano neponuka rozne offsety rovnakych prevodnikov) - t.j. pri klukach s 52mm chainline by mala zostat tato retazova linka zachovana aj pri tomto prevodniku.
Dobry den, na margo mojich otazok ohladne noveho XTR prevodnika mam otazku.
Momentálne používam kľuky Shimano XTR 9120 s reťazovou linkou 52 mm a zadnou osou Boost 148 mm. Mám na nich prevodník Garbaruk 32T s 3 mm offsetom a pasuje bez problémov.
Teraz by som si chcel kúpiť nové kľuky XTR 9200, ktoré majú reťazovú linku 55 mm. Mohli by ste mi, prosím, potvrdiť, ktorý Garbaruk 32T prevodník by som mal použiť?
Podľa výpočtu by som mal mat 6 mm offset (keďže pri 52 mm CL mam prevodnik s 3 mm offsetom, tak pri 55 mm CL by mal byť s 6mm offsetom (+dalsie 3 mm navyše). Mám pravdu?
Dobry den,
ano, tak ako pisete, kedze uz tieto nove XTR kluky maju trosku inu konstrukciu, a cela retazova linka je posunuta este viac od ramu, tak pre zachovanie povodnej retazovej linky by mal byt potrebny prevodnik s vacsim offsetom.
Samozrejme milimetrovo to sediet nemusi, najma ak sa teda jedna o prevodniky od aftermarket vyrobcov, ale v tomto pripade zial ina moznost ako vyskusat neexistuje
Dobry den, bude mi prosim Vas pasovat tento prevodnik aj na predchadzajucu generaciu XTR? Mam Shimano XTR FC-M9120-1 crank 1x12s. Dakujem vopred za odpoved.
Dobry den,
ano, prevodnik by mal sadnut podla Shimano aj na starsie XTR kluky.
WARNING:
For installation, adjustment and replacement information that is not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Before riding your bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to get parts of your clothing caught in the chain while riding. Otherwise, you may fall off the bicycle.
CAUTION:
Be careful and do not touch the teeth of the sprockets. There is a risk of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
