Giant Stance 2 29 bike, black diamond
Giant Stance 2 29 bike
ALUXX aluminum frameALUXX frames manufactured from high-quality aluminum alloy in our own factory bring high stiffness and strength with low weight. A modern design with internal Bowden cable routing is a matter of course . The geometry of the frame is fully optimized for 29" wheels , which provide more agility in technical passages, good inertia and traction, which can be seen, for example, in turns or when braking.
Quality suspension
The FlexPoint suspension is a proven and commonly used single-pivot rear suspension with auxiliary repacking. It is therefore a system that is structurally very simple, but at the same time fully functional. The advantage is easy maintenance , because fewer pins mean fewer bearings. FlexPoint provides a lift of 125 mm and reacts sensitively to larger and smaller unevenness through the air shock absorber . The air-suspended fork provides 140 mm of travel .
Ready for trails
The offered models are equipped with a telescopic seat post , which will make riding on downhills and technical passages safer and more fun . In more difficult terrain, you will definitely appreciate wider handlebars, which will ensure better handling of the bike, and wider trail/enduro tires will give you more confidence . In addition, the bikes are already tubeless from the factory (it is enough to apply the sealant), which brings better driving characteristics and reduces the risk of a defect.
Level and quality of equipmenthelp
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
Specification
Frame |
ALUXX-grade aluminum, 125 mm FlexPoint suspension, 12x148 mm thru-axle
|
Fork |
Giant STL 34 RCL, 140 mm, Boost 15x110 mm QR, custom tuned for Giant
|
Rear shock |
Suntour Raidon R, 190x45 mm
|
Shifting |
Shimano CUES SL-6000-10R, 1x10
|
Derailleur |
Shimano CUES RD-U6000
|
Cassette |
Shimano CUES CS-LG300, 11-48T
|
Chain |
Shimano CUES-LG500
|
Cranks |
Shimano CUES FC-U6000-1, 30T, 170 mm
|
Brakes |
Shimano BL-MT201/BR-MT200, hydraulic, Shimano RT-26 rotors [F] 180 mm, [R] 180 mm
|
Rims |
Giant AM 29 alloy
|
Hubs |
[F] Giant Tracker Performance Boost 15x110 mm, sealed bearing
[R] Giant Tracker Giant Sport QR 141 mm, loose ball |
Spokes |
Sapim
|
Tires |
[F] Maxxis Minion DHF 29x2.5 WT, EXO, TR
[R] Maxxis Dissector 29x2.4 WT, Dual, EXO, TR |
Seatpost |
Giant Contact Switch AT dropper, remote S: 140 mm - 110 mm travel / 30.9 x 395 mm M: 170 mm - 140 mm travel / 30.9 x 470 mm L: 200 mm - 170 mm travel / 30.9 x 530 mm XL: 200 mm - 170 mm travel / 30.9 x 530 mm
|
Saddle |
Giant Romero
|
Stem |
Giant Contact SL 35 S: 40 mm, M: 40 mm, L: 50 mm, XL: 50 mm
|
Handlebars |
Giant Contact SL TR35, 780 x 35 mm
|
Grips |
Giant Sole-O
|
Bottom bracket |
Shimano, threaded
|
Accessories |
tubeless kit
|
Product details
Sex | Men, Unisex |
Model year | 2024 |
Groupset | Other |
Gears | 1x10 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Fork travel | 140 mm |
Material | aluminium |
Size | S |
Colour | black diamond |
Fork | Air |
Shock | Air |
Wheel material | Aluminum |
Rear travel | 125 mm |
Max. chainring size | 32t |
Max. shell width | 2.4" |
product ID | 259011 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews