GT Fury Custom 29 bike, gray
GT Fury Custom 29 bike
The Gt Fury downhill bike is tailor-made for racers and bike park enthusiasts. The frame works with three Flip chips. You can choose between 29" wheels, or setting it to 27.5" using a chip between the seat stays and the rocker arm. At the bottom mount of the shock absorber, there is another flip-up chip that will allow you to set the wheel with more progressive or linear kinematics to suit the rider's preferences and the characteristics of the track. The third chip adjusts the effective chainstay length and varies from 440mm to 450mm in the 29" wheel setup and 435 to 445mm in the 27.5" setup. A redesigned carbon front triangle arrangement reduced the overall weight by about 300g. The total weight of the frame is 4300 g without shock absorber. GT placed as much of the frame's weight as low as possible to lower the center of gravity and improve stability. The proven High-Pivot LTS suspension system, which was already used in the previous Fury model. However, a number of improvements and modifications have been made to make the new Fury faster and more predictable. Another detail worth mentioning is the head tube angle. The latter is actually steeper and ranges from 62° to 63.5°.Level and quality of equipmenthelp
Bikes for those who want light weight, 100% functionality at a professional level and will settle only for the best. Frames made of extra light alloys or carbon are complemented by top components and technologies.
Specification
Frame |
Fury Carbon MX Frame, 200 mm Travel, 12x148 mm Rear Thru-Axle, 27.5" Wheel Ready
|
Fork |
RockShox BoXXer Ultimate RC2 200 mm, Charger 3, DebonAir+ w/ Buttercups, 20x110 mm Boost, 52 mm Offset
|
Rear shock |
RockShox Super Deluxe Coil Ultimate DH RC, 225 x 70mm Trunnion, Red Spring
|
Shifting |
Shame X01 DH
|
Derailleur |
Shame X01 DH
|
Cassette |
SRAM XG-795 10-24T
|
Chain |
SRAM PC-1170 116 cells
|
Cranks |
Sram X01 DH ALL DH 165 mm
|
Brakes |
SRAM Code Silver Stealth hydraulic, Sram HS2 rotor 220 mm 6-bolt
|
Wheels |
Mavic Deemax 29" 21 Boost, 15x110 mm/12x148 mm axle
|
Tires |
Michelin DH22 TLR 29x2.40" wire
|
Seatpost |
ZIPP Service Course 31.6 mm, 350 mm length, 0 mm offset
|
Saddle |
Fizik Saddle Gravita Alpaca X5 + CARRIAGE KIT
|
Stem |
Truvativ Descendant 35 mm clamp 50 mm, Direct Mount
|
Handlebars |
Truvative Descendant 35 Alu 800x25 mm
|
Grips |
Sram DH Silicone Locking grip
|
Headset |
FSA Orbit 1.5"
|
Bottom bracket |
Shame OAK 83
|
Pedals |
Time Speciale 12
|
Product details
Sex | Men, Unisex |
Model year | 2023 |
Groupset | SRAM X01 |
Gears | 1x7 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 200 mm |
Material | carbon fiber, aluminium |
Size | M |
Colour | grey |
Fork | Air |
Shock | Spring |
Wheel material | Aluminium |
Rear travel | 200 mm |
product ID | 252899 |
Veľkosť | XS | S | M | L | XL |
---|---|---|---|---|---|
Výška jazdca (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews