Shimano FH-TC500 rear hub, CenterLock, 32 holes, 148x12 mm, Shimano HG
Strong and lightweight rear hub with industrial bearings for reliable performance. Easy installation of the disc brake rotor on the Center Lock. 12mm fixed E-Thru thru-axle. Walnut: HG 8/9/10/11. Hub width: OLD - 148mm. Bearings: 15x28x7mm.
Type: MTB, Total package weight: 474g, 32 holes, Rear, Black, 8/9/10/11 speed -MTB, Mounting method: Fixed axle 12mm, Center Lock, Material: Aluminum
| Colour | black |
| Location | Rear |
| Axle type | fixed "boost" |
| Nut | Shimano HG |
| Brake disc installation | Center Lock (CL) |
| product ID | 232408 |
•
Variant Shimano FH-TC500 zadný náboj, CenterLock, 32 dier, 148x12 mm, Shimano HG
Hello!
Is there a version with 36 holes?
I couldn't find a 148/12 rear hub with 36 holes anywhere in your entire E Shop.
Or a nut for the Shimano MT 510 B hub?
•
edit
Dobrý deň,
Poprosíme upresniť s akým orech náboj hľadáte, resp. aký orech (tzn. či HG alebo Microspline). Náboj FH-MT510-B sa ponúka len s Microspline orechom ale dotazujete sa pri náboji s HG orechom.
•
ide o microspine orech , má poškodený závit
•
Dobrý deň,
Preverovali sme dostupnosť ako samotného orecha tak aj nábojov ale ani orech ani kompatibilné náboje momentálne nie sú dostupné na EU sklade Shimana. Vieme aktuálne ponúknuť náboj https://www.mtbiker.sk/shop/kolesa-a-rafiky/naboje/mtb-kotucove/shimano-naboj-zadny-mt510-142x12mm-oska-32d-12-k-cierny-center-lock-p87243.html z ktorého by ste si odobrali orech a mohli ho použiť na Váš náboj (cena nového orecha je len o kúsok nižšia než cena tohto náboja)
•
Variant Shimano FH-TC500 zadný náboj, CenterLock, 32 dier, 148x12 mm, Shimano HG
Good day.
Can I buy spring-loaded latches for this cartridge?
Or maybe bearings?
Thank you
•
Dobry den,
zial samostatne zapadky/pruzinky Shimano ako nahradny diel v ponuke nema.
Loziska - podla technickcyh rozkresov sedia loziska no. 6902, napr. https://www.mtbiker.sk/shop/kolesa-a-rafiky/prislusenstvo/orechy-a-ostatne/enduro-bearings-6902-llb-lozisko-15x28x7-mm-p141698.html?preview.
WARNING
For installation, adjustment and replacement information of the products which are not found in user's manual, consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and keep it in a safe place for later reference.
The following directions must be always followed in order to prevent personal injuries, physical damages to equipment or surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could cause personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. If the quick release lever is not used correctly, the wheel may come off and so on, and a serious injury may result from falling or colliding.
- Be sure to read the user's manual for the E-THRU system lever carefully. If the E-THRU system lever is not used correctly, an accident may occur due to the wheel falling out, which could result in serious injury.
- Before riding the bicycle, you should check the hubs and make sure that there are no cracks in the axles; if any unusual conditions are found, do NOT ride the bicycle. These rear hubs have not been designed for downhill riding or freeriding. Depending on riding conditions, cracks can form on the hub axle, which can cause the axle to break, possibly leading to an accident with consequences of serious injury or death.
- Check that the quick release lever does not interfere with the disc brake rotor even when it is fully engaged. If the quick release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the quick release lever interferes with the disc brake rotor, stop using it immediately and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
-24% Shimano Deore M6010 rear hub, Center Lock, 32 bolts, 12x142 mm
49.90 €
-24%
RRP 81.99 €
savings Shimano XT FH-M8010 rear hub, 32 holes, 12x142 mm, Center Lock, Shimano HG freehub
69.99 €
savings
RRP 109 €
Shimano FH-QC300 rear hub, CenterLock, 32 holes, QR, Shimano HG
26.99 €
RRP 30.99 €
Shimano SLX HB-M7110 front hub, 15x100 mm, 32 holes, CenterLock
57.99 €
RRP 65.99 €
-14% Shimano FH-TC600 rear hub, CenterLock, 32 holes, 148x12 mm, Shimano HG
47.99 €
-14%
RRP 67.99 €
savings DT Swiss Champion 2.0 J-Bend spoke, silver
from 0.19 €
savings
RRP 0.50 €
savings DT Swiss Competition J-Bend spke, 2.0 - 1.8 - 2.0, black
from 0.89 €
savings
RRP 73.99 €
savings DT Swiss Competition Straight Pull spoke, black 2.0/1.8
from 0.89 €
savings
RRP 73.99 €
Sale savings Shimano SM-AX56 E-Thru rear axle, 12x142 mm/171 mm
23.99 €
savings
RRP 35.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Variant Shimano FH-TC500 zadný náboj, CenterLock, 32 dier, 142x12 mm, Shimano HG
.
Translate by GoogleShow the originalVariant Shimano FH-TC500 zadný náboj, CenterLock, 32 dier, 148x12 mm, Shimano HG