Kellys ARC 30 bike, white
Choose in-person pick-up at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
Kellys ARC 30 bike
Suitable for riding on roads and cycle paths after work or over the weekend. These bikes have a more comfortable geometry than sports bikes, but they have their limitations when it comes to equipment, which will need more frequent fine-tuning.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Road bike rim brakes
They use the transmission of energy from the lever to the brake arms via a steel cable, are lighter, more affordable and easier to maintain. The braking effect is lower in wet conditions. In addition to the rapid wear of the blocks, dirt can also cause damage or faster wear of the rim.
| Frame |
KELLYS Endurance Concept - Aluminium alloy, tapered HT, internal routing
|
| Shifting |
SHIMANO Sora ST-R3000 Dual Control
|
| Derailleur |
SHIMANO Sora R3000 (direct mount)
|
| Front derailleur |
SHIMANO Sora R3000 (braze on)
|
| Chain |
KMC X9 (108 links)
|
| Crankset |
SHIMANO Sora R3000 (50x34T) - length 170 mm (S), 175 mm (M - L)
|
| Brakes |
TEKTRO
|
| Brake levers |
SHIMANO Sora ST-R3000 Dual Control
|
| Rims |
KELLYS Spark 622x15 (32 holes / riveted)
|
| Rear hub |
SHIMANO Claris 2400 (32 holes)
|
| Spokes |
stainless steel black
|
| Tires |
SCHWALBE Lugano K-Guard 25-622 (700x25C)
|
| Seat post |
KLS Active - diameter 30.9 mm / length 350 mm (S - M), 400 mm (L)
|
| Saddle |
KLS SlipStream cr-mo rails
|
| Stem |
KLS Active Road - diam 28.6 mm / bar bore 31.8 mm / 6° / length 90 mm (S), 100 mm (M), 110 mm (L)
|
| Handlebars |
KLS Active Road - diameter 31.8 mm / width 400 mm (S), 420 mm (M), 440 mm (L)
|
| Grips |
KLS bar tape
|
| Headset |
FSA 1.5 semi-integrated
|
| Bottom bracket |
SHIMANO BB-RS500
|
| Cassette pinion |
SHIMANO CS-HG300-9 (11-32T)
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 2x9 |
| Groupset | Shimano Sora, Shimano Claris |
| Colour | white |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 28" |
| Brakes | Road rim |
| Fork | Rigid |
| Control type | mechanical |
| product ID | 174041 |
| Bike size | S | M | L |
|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 180 cm | 180 - 195 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
•
Hello,
What is the maximum permissible tire width for the fork and rim brake combination used?
Thank you
Paul
•
Dobrý deň,
Žiaľ výrobca nešpecifikuje o aký presne model brzdovej čeľuste sa jedná ale predpokladáme na základe viacerých Tektro modelov že pôjde použiť max. plášť o šírke 28c
•
What material is the fork made of?
Automatically translated
•
edit
Dobry den,
bicykel disponuje karbonovou vidlicou.
•
weight?
Automatically translated
•
Dobrý deň, v akej veľkosti?
Vo veľkosti L, ďakujem 
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Clearance -29% fizik Vento Infinito Knit Carbon 2 Wide cycling shoes, black/black
from 269 €
-29%
RRP 379 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Satisfaction.
Automatically translatedOverall it is enough for me... BUT the handlebars have a short grip, when I hold the handlebars down, half of my palm is out, it looked different in the picture. And the tires in the description are SCHWALBE Lugano K-Guard 25-622 (700x25C) and the real ones that came were Impac Racepac 700x23c. "Alternative parts should be at the same level as the original ones", but these are not! Despite the seller's warning, I think that the SELLER IS RESPONSIBLE for the goods sold (because the buyer also makes decisions based on what he sees in the description) and he should take care of this - discuss it with the manufacturer, supplier. When there is a change in components, the manufacturer should notify the seller and the seller should then contact the customer to see if he agrees with such a change in components. If this does not happen, it is not a serious approach by the seller to the customer. The excuse is rather an alibi...
Automatically translated