Shimano Deore M6100 hydr. rear brake, Post Mount, 1 700 mm hose + G05S pads

WARNING
For information on the installation, adjustment and replacement of the products which are not to be found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be always followed in order to prevent personal injury, physical damage to equipment or damage to the surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could cause personal injury or physical damage to equipment and surroundings.

WARNING
- Because each bicycle may handle slightly differently, depending on the model, be sure to learn the proper braking technique (including brake lever pressure and bicycle control characteristics) and operation of your bicycle. Improper use of the bicycle's brake system may result in a loss of control or falling, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Downhill riding and freeriding are inherently dangerous activities. It is strongly recommended that riders wear head and body protection gear and perform thorough safety inspections of their bicycles before each ride. Remember that you ride at your own risk, and so you should consider your experience and abilities very carefully. There is a risk that you may be involved in an accident resulting in serious injury or death.
- Before riding the bicycle, riders must get used to the increased performance of this brake.
- The brake system is designed for downhill riding and freeriding, and its braking force is much higher than that of other brakes. If you do not familiarize yourself with the performance level of this brake, you may be involved in an accident resulting in serious injury or death. In addition, the brake settings do not allow for riding on city streets. Sudden braking may cause the bicycle to pitch forward, which may result in serious injury or even death.
- 203 mm and 180 mm disc brake rotors provide greater braking force than 160 mm disc brake rotors. If you ride the bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in falling off the bicycle with the possibility of serious injury or a fatal accident.
- In addition, be very careful to keep your fingers well away from the rotating disc brake rotor. The disc brake rotor is sharp enough to inflict serious injury to your fingers if your fingers get caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor during or immediately after riding the bicycle. The calipers and disc brake rotor become hot during braking, so you may be burned if you touch them.
- Be careful not to get any oil or grease on the disc brake rotor and brake pads. If the bicycle is ridden with oil or grease on the disc brake rotor and brake pads, the brakes may not work, and serious injury could result from falling or collision.
- Check the brake pad thickness, and do not use the brake pads if they are 0.5 mm or less in thickness. Doing so may cause the brakes to not work, and serious injury could result.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor may break, and serious injury could result from falling. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor may break, and serious injury could result from falling. Replace the disc brake rotor with a new one.
- Do not apply the brakes continuously. Doing so may cause a sudden increase in the brake lever stroke, causing the brakes to not work, and serious injury could result.
- Do not use the brakes if there is any fluid leakage. Doing so may cause the brakes to not work, and serious injury could result.
- Do not apply the front brake too strongly. If you do so, the front wheel may lock and the bicycle may topple forward, causing serious injury.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall down or collide and be seriously injured.
- A wet road surface can cause the tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires lose traction, you may fall down and be seriously injured.

CAUTION
„- Cautions regarding SHIMANO genuine mineral oil
- Use suitable eye protection when handling, and take care to prevent it from getting into your eyes. If it gets into your eyes, flush the eyes with clean water and seek medical advice immediately. Contact with the eyes may cause irritation.
- Use protective gloves when handling. If it gets on your skin, wash it off properly with soap and water. Contact with the skin may cause rashes and difficulties.
- Protect your nose and mouth with a protective breathing mask, and use in a well-ventilated room. Inhaling mineral oil vapor or fumes may cause nausea.
- If you inhale mineral oil vapor or fumes, move to a place where there is fresh air. Cover yourself with a blanket. Stay warm in a stable position, and seek professional medical advice immediately.
„ Break-in period
- Disc brakes have a break-in period, and the braking force will gradually increase along with the increasing break-in period. Be sure to avoid any such increases in braking force during use of the brakes in the break-in period. The same situation occurs when the brake pads or disc brake rotor are replaced.