Shimano XT FH-M8010 rear hub, 32 holes, 12x142 mm, Center Lock, Shimano HG freehub
Shimano XT FH-M8010 rear hub
|
Refined hub sealing for long life
|
|
Classic hub design with cones for easy setup and service
|
|
Polished ball tracks on cones and hubs for smooth operation and low rolling resistance
|
| Colour | black |
| Location | Rear |
| Number of holes | 32 |
| Axle type | thru |
| Nut | Shimano HG |
| Brake disc installation | Center Lock (CL) |
| Weight | 359 g |
| Dimensions | 12 x 142 mm |
| Brake disc installation | Center Lock |
| Freehub type | Shimano 8 - 11 speeds |
| product ID | 10744 |
Kúpil som vo vašom e-shope GT Avalanche Elite 29", kde je zadný náboj shimano FH-M200 Altus s klasickým rýchloupinákom. Rozteč zadnej stavby vidlice je boost 141-142mm. Šírka vyššie uvedeného náboja medzi skrutkami je 141mm. Prosím o informáciu, či na náboj "Shimano zadný náboj XT M8010 142x12 mm oska 32d. 9/10/11-k. čierny Center Lock" existujú redukcie, resp. adaptéri zmenu z 12mm na 10 mm na používanie rýchoupináku ako je to na náboji Altus M200. Vopred ďakujem za odpoveď.
Dobrý deň,
žiaľ Shimano nič takéto neponúka. Ani u dodávateľov som nič také nenašiel a ani v nákresoch Shimano nie sú.
Dobrý den,jakou mi doporučíte alternativu v XT řadě k náboji shimano fh-tx505 32d
Dobry den,
z ponuky Shimano nabojov napr.:
- https://www.mtbiker.cz/shop/kola-a-rafky/naboje/mtb-kotoucove/shimano-naboj-zadni-acera-m3050-89-k-cerny-center-lock.html
- https://www.mtbiker.cz/shop/kola-a-rafky/naboje/mtb-kotoucove/shimano-deore-fh-m6000-zadni-naboj-center-lock-32-der-rychloupinak-shimano-hg.html
Od inych vyrobcov napr.:
- https://www.mtbiker.cz/shop/kola-a-rafky/naboje/mtb-kotoucove/force-cl-32-zadni-naboj-32-der-cerny-44504.html
Dobrý deň. Mám FH-M618, chcel by som ho zameniť za FH-M8010. Je to možné?
Dobrý deň,
áno, zámena je možná, nakoľko náboje majú rovnaké parametre.
Dobry den
dodava sa k naboju aj penva os?
Dakujem
Dobrý deň,
K náboju sa oska nedodáva.
hľadám náhradu za shimano tiagra HB-RS470 28 dier
Dobry den,
potrebujete predny alebo zadny naboj? HB-RS470 je predny naboj.
Aky rozmer osky potrebujete?
https://www.mtbiker.sk/shop/kolesa-a-rafiky/naboje/cestne/novatec-d792sb-cl-x12-a4a-abg-11s-zadny-naboj-cl-28-dier-12x142-mm-shimano-hg-oem-p236617.html
// na tento XT naboj, pod ktorym sa pytate neosadite cestne 11- a 12-rychlostne HG kazety.
ahojte. bude pasovat na naboj 12 kolova kazeta ?
Dobry den,
je mozne pouzit aj 12-rychlostne MTB HG kazety (nie MicroSpline a XD).
Aká šírka osky do toho ide?
Pozdravujeme,
do tohto náboja ide 12x142mm oska typu E-thru.
So I found adapters for all types of hubs 142x12mm to 142x10mm and also for front hubs from 100x15mm to 100x9mm for QR quick-releases on AliExpress. A pair of such adapters costs around 10-15 EUR. They can also be ordered via Amazon. com but there it is more expensive, but delivery within 7 days.
I used these adapters for MAVIC crossmax 29" wheels and use or ride them on the aforementioned MTB GT Elite, on which I replaced all components except the derailleur, cassette and frame.
WARNING
For assistance with installation, adjustment and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be always followed in order to prevent personal injury, physical damage to equipment or damage to the surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could cause personal injury, or physical damage to equipment or to the surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. If the quick release lever is not used correctly, the wheel may come off and so on, and a serious accident could result from falling or colliding.
- Be sure to read the user's manual for the E-THRU system lever carefully. If the E-THRU system lever is not used correctly, an accident may occur due to the wheel coming off, which could result in serious injury.
- Before riding the bicycle, you should thoroughly check the hubs and make sure that there are no cracks in the axles; if any unusual conditions are found, do not ride the bicycle. These rear hubs have not been designed for downhill riding or freeriding. Depending on riding conditions, cracks may form on the hub axle, which may cause the axle to break, possibly leading to an accident with consequences of serious injury or death.
- Check that the quick release lever does not interfere with the disc brake rotor even when it is fully engaged. If the quick release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the quick release lever interferes with the disc brake rotor, immediately stop using it and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.



Calitate shimano
Translate by GoogleShow the original
Zatiaľ OK
Translate by GoogleShow the original
Super
Translate by GoogleShow the original