ORTLIEB Thru Axle M6-Connector axle for ORTLIEB QUICK-RACK
ORTLIEB Thru Axle M6-Connector axle for ORTLIEB QUICK-RACK case
The THRU AXLE M6-CONNECTOR adapter is a practical accessory for mounting your ORTLIEB QUICK-RACK if your bike frame does not have M5/M6 mounting points for pannier racks.|
Thru-axle adapter for all standard 12mm frame thru-axles
|
|
Replaces previously installed thru axle (up to 180mm axle length)
|
|
Integrated M6 threads on both ends for mounting QUICK-RACK attachment points
|
| Thread type | M12 x 1.0 mm M12 x 1.5 mm M12 x 1.75 mm |
| Package contents | 1 ORTLIEB THRU AXLE M6-CONNECTOR solid axle Including spacers for length adjustment (2 x 1.5 mm, 1 x 3 mm, 1 x 6 mm, 1 x 3 mm tapered) 2 x M6 x 40mm, 2 x M6 x 25mm screws M6 washer |
| Warning | The thread length and/or thread pitch as well as the axle length are frame-specific and do NOT always fit every bike! Please note the length, thread length and thread pitch of the axle and, if necessary, request the relevant product information from the manufacturer. Shorter axle lengths are compatible if the axle can be screwed through the frame (outside the thread). |
| product ID | 339327 |
•
Can this axle only be used on a bike with a solid axle? I'm not that good at bike servicing. What do the 3 dimensions mean: 1 mm-1.5 mm-1.75 mm. I was in the Cube store and asked if this axle could be used on the Cube Nuroad Pro or Nulane Pro Fe bike models, they told me that probably not and they also didn't know what the 3 dimensions on the axle were for. I want to buy a gravel bike with a focus on cycling and so I'm looking for a model that has mounts in the back and front for luggage carriers. Unfortunately, very few are made in this segment anymore. This axle would solve this with the appropriate Ortlieb carrier, but I don't know which bike models I can use it on. Please advise me, I'm already going to your store in B. Bystrica, but I'm just a bit clueless about it. Thank you, Dodo
Automatically translated
•
Dobry den,
ano, osku je mozne pouzit len na ramy urcene pre zadne naboje rozmeru 12X142 mm, t.j. so zadnou pevnou 12 mm oskou.
Tri ponukane varianty udavaju stupanie zavitu pre osku, je to specificke pre kazdeho vyrobcu, resp. model ramu. Podla specifikacie Cube ich cestne/gravel ramy s pevnou oskou vyuzivaju stupanie zavitu 1.0 mm.
•
Prosím Vás a kde sa tá hodnotami stúpania závitu dá zistiť? Či, mám sa zohnúť a pozrieť sa? 🫣
•
Dobry den,
bud v specifikacii konkretneho bicykla (ak ju vyrobca udava), alebo realne na konkretnej oske - standardne na oskach byvaju tieto udaje vygravirovane.
•
Asi najlepsia pomocka na zmeranie osky jej dlzky a stupania zavitu:
https://bikepacking.at/media/pdf/64/ce/f1/OMM-Measure-Your-Thru-Axle-A4.pdf
•
Good day.
I have gravel Kellys soot 50.
According to the product information, the bike has a NOVATEC 12x172 mm rear axle, i.e. 172 mm long and 12 mm wide. I measured approximately the same values. I couldn't find information on the thread pitch anywhere, but according to the information about the replacement axle on your e-shop, the pitch is 1.5. Do I understand correctly that I should choose the M 12 x 1.5 variant? The adapter axle has a total length of 180 mm and the difference from the 172 mm of the original axle is compensated by the included washers?
Thank you very much. Lukas
•
A.I. tvrdi tiez ze tam mas osku so stupanim zavitu 1,5mm, mala by to byt tato:
https://kellysbike.com/sk/sk/pevne-osi/zadna-pevna-os-novatec-m12xp1-5x172_10867
A ano, ten rozdiel v dlzke vypodlozis prilozenymi podlozkami, je ich tam dost, nejako to vyskladas.
•
Hello! I ordered a Scott Scale 950 2025 bike, size L. I want to order an ORTLIEB Thru Axle M6-Connector axle for an ORTLIEB QUICK-RACK case from you. I just don't know which one will fit. At least I hope that this axle can be mounted there. I would like to ask for your advice on what to order and also the size of the rack for this bike. Thank you
Automatically translated
•
Dobrý deň, vedeli by ste mi odfotiť akú osku máte na vašom bicykli neviem vám bez toho poradiť.
•
Dobrý deň,
Chcel by som sa spýtať či by mi na môj gravel superior xr 6,3 gr pasovala táto oska ortlieb na quick rack3. Osku ktoru mam aktualne je na obrazku. Neviem ci by to vyslo dobre aj na druhej strane. Stupanie by malo byt 1,5...Ďakujem za radu.
•
Dobry den, vyberte si verziu so stupanim zavitu 1,5 a dlzku osky bude treba vycentrovat pomocou prilozenych podloziek. Pri oske je aj podrobny navod ako ju nainstalovat.
•
Hello, I would like to ask if you would recommend this axle in conjunction with the quick rack M on the cube nuroad for 2025? Because I don't have any mounts there and the acid carrier seems extremely unstable. It will probably be a 1.0mm thread though? Thanks in advance for the advice.
Automatically translated
•
DObry den, ak chcete pouzivat ortlieb quick rack tak potrebujete tuto osku avsak aky zavit potrebuejte Vam nevieme potvrdit. NIekedy je to napisane na oske a ak nie tak je to potrebne odmerat. S tym Vam pomozu v kazdom profi servise.
•
Hello.
Is this axle only suitable for 142mm, i.e. non-boost? I would need to mount the Quick-Rack XL on a mountain bike with a 12x148 boost axle (I found on the Canyon website that the thread is 1.0). Will this axle also be suitable for boost?
Thank you
•
Dobry den,
oska sedi aj na Boost ramy - dlzka osky je pomocou podloziek nastavitelna v rozmedzi 165/168 mm - 180 mm.
•
Ďakujem veľmi pekne.
Takže keď je oska nastaviteľná budem môcť nosič použiť aj na cestný aj na horský bajk bez potreby dvoch osiek. Perfektné.
Ďakujem.
•
Ano, pokial sedi rozmer a stupanie zavitu, tak je oska samozrejme pouzitelna na rozne ramy.
•
Thanks for the answer. Which gravel bikes in your store would be suitable for using this axle? So that I know what to choose from. Dodo
Automatically translated
•
Zdravim Dodo,
aky mate rozpocet?
Standardne je uz pre lepsie gravel bicykle pevna oska vzadu standardom, radi poradime s vyberom
•
O.K. Takže idem kúpiť gravel bike so zameraním na cykloturistiku, nie na pretekanie sa alebo preháňanie sa v teréne, na to mám MTB. Požadujem od biku výbavu Cues, do inej nepôjdem. Ďalej montážne body na nosiče vzadu a vpredu, prípadne možnosť montáže osky od Ortliebu. Samozrejme chcem už lanká vedené vnútrom rámu, Prevody 46/30 -11/45 alebo jednoprevodník 40-11/51. Zatiaľ som našiel len jeden bicykel čo približne zodpovedá mojim požiadavkám a to je Cannodale Topstone 2 Cues. Ešte ako tak vyhovoje Nuroad Pro Cube alebo Nulane Pro Fe tiež od Cube. Ale tam je málo úchytných bodov. Mám už 65 rokov, som skúsený cykloturista, môj bike na ktorom sa túlam svetom má už skoro 40 rokov a aj keď je vo výbornej kondícii, chcem už niečo z novšej generácie bikov. Takže asi tak. Chystám sa k Vám do B.Bystrice, keďže som z Lučenca, ale ako pozerám Váš E-shop, na Cuese nemáte zatiaľ nič. S úctou Dodo
•
Dobry den prajem,
je to tak, Cues sada sa na gravel bicykloch u vacsiny vyrobcov nevyskytuje :/ Najcastejsie sa ide cestou gravel-specific sad, napr. GRX, v roznych kvalitativnych urovniach.
Ak mate zaujem specificky o bicykel na Cues sade, tak druhou moznostou je vymena pohonu na akomkolvek bicykli - povodnu sadu vieme zhodit, a bicykel osadit pozadovanym setupom presne na mieru, ci uz sa bude jednat o spominay 1x alebo 2x setup - samozrejme, podmienkou bude aktualna mozna dostupnost potrebnych dielov - s dalsimi otazkami, pripadne postupom, Vam radi pomozu kolegovia aj osobne, na akejkolvek nasej predajni, vratane BB
Inak te Cannondale nebude zlou volbou - najma co sa tyka spominanych montaznych otvorov, disponuje nimi ci uz ram, tak rovnako aj vidlica.
•
edit
Ahoj dobrý den potřebuji poradit a zjistit jaká osa půjde na kolo
TREK Procaliber 9.7
a TREK Slash 9.9 děkuji moc.
•
Dobrý deň,
Výrobca žiaľ nešpecifikuje aké stúpanie závitu majú pevné osky vašich bicyklov. Skúste prosím pozrieť na aktuálne osky a na nich by sa malo uvádzať stúpanie závitu (M12x1.0/M12x1.50/M12x1.75) a vyberte osky podľa toho. Taktiež je potrebné dať pozor na dĺžku osky, táto Ortlieb oska má max. dĺžku 180 mm (celková dĺžka zo závitom ale bez hlavičky). Ak by ste mali osky dlhšie tak táto oska nebude sedieť.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale savings Shimano SM-AX56 E-Thru rear axle, 12x142 mm/171 mm
23.99 €
savings
RRP 35.99 €
-15% Ere Research OMNIA II CLR45 CARBON 28" wheel set, disc, thru axle
849 €
-15%
RRP 999 €
-7% Ere Research GENUS II CL45-R CARBON DISC 28" wheel set, tire, disc, thru axle
1,399 €
-7%
RRP 1,699 €
-7% Ere Research GENUS II CL45 CARBON DISC 28" wheel set, disc, thru axle
1,299 €
-7%
RRP 1,499 €
Clearance -14% DT Swiss HX1700 Spline 35 27.5" wheel set, Boost, 6 bolt, SRAM XD, OEM
429 €
-14%
RRP 499 €
Sale savings SKS Blade mudguard set, 29"/27.5"+, black/green
32.99 €
savings
RRP 47.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Everything fits as it should. I've been waiting for this for a long time because the carbon canyon doesn't have many options for attaching a carrier. I recommend it
Automatically translated
Kompatibilne s Canyon Grail CF SLX 8 AXS, umoznuje pouzitie ORTLEB Quick-Rack
Translate by GoogleShow the original
Ahoj. Ten rozdiel medzi povodnou dlzkou osky a adapterom (180 mm) sa vypodlozi ako vidim na obrazku?
Translate by GoogleShow the originalMam kellys soot 50, dlzka osky 172 mm. Vdaka.
Ak som pochopil spravne otazku, tak presne tak. Pouziju sa tie plastove kruzky (spacers) aby to odpovedalo dlzke konkretnej osky podla potreby. Online sa da najst navod k produktu kde to bude asi lepsie vysvetlene a ukazane na obrazkoch.
Translate by GoogleShow the original
Asi naj system na karbon bike
Translate by GoogleShow the original