Fritschi Xenic 10 Ski mountaineering binding | 95mm
Fritschi Xenic 10 Ski mountaineering binding | 95mm
In the 2019/20 season, the Fritschi brand came up with the new Xenic 10 model in the category of light bindings, ideal for skis up to 105 mm under the heel. The Xenic 10 model weighs only 280 g (560 g/pair) without brakes and will be appreciated especially by ski alpinists who pedal more, pay attention to weight, but do not want to compromise on safety and comfort of use. Among other things, the Xenic 10 binding model is the result of the modernization of existing Fritschi technologies and offers users various innovations in safety, user comfort and controllability while driving.
Brand new tip and pin jaws from Fritschi
The Fritschi Xenic binding tip is completely redesigned. This is the first binding whose pins open and close laterally, ie to the side and do not rotate around a fixed point. This mechanism offers two main advantages:
● easy entry into binding,
●much greater resistance to unwanted shutdown in the event of an impact from below, which can occur at higher speed or when falling on skis
● switches off vertically even in walking mode – when covered by an avalanche, loss of balance during ascent or fall during short descents on belts.
● made of carbon supplemented with proven modern polymers - they are lighter than metal parts and at the same time have higher strength and durability.
You can also attach the harshajsny to the tip, which are available in three widths: 85 mm, 95 mm and 105 mm. The tip is also equipped with a place to attach a strap in case of use without brakes.
Swivel heel with adjustable release force
The heel of the Fritschi Xenic 10 binding combines low weight and safety features, which until now have only been a feature of heavier ski mountaineering bindings. The heel platform is wide and offers an optimal transfer of the power transferred to the ski and thus achieves excellent downhill properties. The lateral release force can be adjusted to DIN values from 4 to 10 using the screw on the back of the binding. The precision of the adjustable vertical tripping force is ensured by independently rotating pins (advantage over U-shaped pins) from force DIN 4 to 10.
The transition between pedaling mode and skiing is easy and comfortable with the help of a rotating heel. You can more easily turn the heel of the Fritschi Xenic 10 binding by 180° using the folded out heel support, which gives you more leverage. deflect up to 13 mm before switching off to prevent unwanted switching off due to shocks and vibrations while driving. Also, when bending the ski, where the distance between the tip and the heel is shortened, the heel can move and prevent unwanted shutdown at important moments, while also eliminating damage to the binding.Excellent skiing thanks to the active heel
The active sliding heel adapts to the ski boot by up to 10 mm when the ski bends while driving and enables smooth bending of the ski along its entire length, which is a necessary feature of the binding for perfect skiing. A binding that does not have an active heel will cause the ski to bend, the center will stiffen, and the ski will bend only before and behind the binding, which significantly worsens its driving characteristics. Fritschi has eliminated this problem, which is why the Xenic 10 binding is also great for excellent riding enjoyment.
Light and above all safe skitouring binding
Skitouring binding Fritschi Xenic 10 is the best choice for those who want light and at the same time safe binding on the slopes without the need to lock the toe. The Xenic 10 binding is intended more for pedaling, but it can easily handle downhill. Thousands of climbed meters and great skiing experiences are definitely waiting for you with it.
Easy to turn on even on a steep slope
The new generation Fritschi Xenic 10 has an innovative tip that you can "kick" even blindly because it has:
- stops from below,
- stops from the sides,
- stop on the tip of the ski boot,
- sensitive trigger.
Thanks to this, the tip of the ski boot is precisely guided into the correct position when it is turned on - it is located between the spikes and a sensitive trigger, and even with a little pressure it releases the spikes, which fit exactly into the inserts in the ski boot.
Warranty and quality post-warranty service
For binding Fritschi Xenic 10 purchased in the Czech Republic from authorized dealers, we provide a 3-year warranty, post-warranty service and availability of parts for at least 10 years. Spare parts are in stock in the Czech Republic.
- Availability of spare parts for at least 10 years.
Safety heel: Yes
Safety tip: Yes
pin binding: Yes
Number of heels: 1
Size: 95
Manufacturers: Fritschi
Product details
Sport | ski mountaineering |
Material | carbon fiber, plastic, steel |
Colour | black |
product ID | 185830 |
Rating 0/5
Similar products
You can try these searches
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews