Black Crows set - Ferox Freebird skis, 110 mm + straps, T12 binding

Ferox Freebird 181 2021/22 Set

You love powder, you alternate heli and pedaling. That's why you like to do something extra to get your own line. You want to go higher and further, so that each subsequent descent is a little longer and steeper. Ferox Freebird skis will come in handy for this, which will meet all your expectations and open up new possibilities. Thanks to the width of 110 mm under the heel, you will float even in deep snow, with a weight of 1,800 g, stepping up will not be a big chore. The rocker on the toe and on the heel will allow you to quickly change direction, and the camber under the center together with the radius of 21 m will be appreciated when the snow changes. Even on a hard surface and at a higher speed, you will feel complete stability in every curve.

No snow will be very deep

The key to enjoying driving in deep snow is buoyancy. The ski floats on top of the quilt and you choose the rhythm and direction with complete ease. All of us who ride wait for this feeling of happiness and freedom every winter. Thanks to Ferox Freebird skis, you can really enjoy it to the fullest.

• 110 mm below the center - it keeps you on the surface and adds lightness to the ride.
• Rocker in the tip - increases buoyancy, the skis do not heat up and do not kick when changing direction.
• Rocker on the heel - in deep snow it will allow you to have a lower and more stable stance
• Softer tip and foot - skis copy unevenness and adapt to the load.

Stability and driving pleasure at speed even when the snow changes

• Medium classic camber in the middle of the ski - ensures driving stability and good grip on hard or blown snow.
• Carbon copies the 3D H-profile of the ski - rigidity in torsion, longitudinal direction and quick energy transfer to the edge while maintaining a low weight - you will feel safe and stable on the skis.
• Core of poplar, Paulownia and Isocor (polyurethane foam reinforced with fiberglass) - absorbs vibrations, the skis are quiet - you will appreciate how predictable the ski is even at higher speeds and with changes in the snow.

You will not worry and you will enjoy the descent even after a difficult ascent

• Paulownia in the core - weight 1,800 g - after the ascent, you will have enough strength for the maximum downhill experience.
• Noble materials such as carbon, fiberglass and paulownia significantly reduce the weight of the ski - you can go further and higher - for more beautiful and longer runs.

Simplicity of control is the key to driving pleasure

• Double rocker – shortens the active edge and makes it easier to enter the arc, changing direction is a breeze thanks to this.
• Extended tip and foot - shortens the cut, which increases the turning of the ski, in deep snow gives the skis peace and stability.
• Softer tip and heel, stiff middle - even a weak impulse is enough for the ski to obey you and change direction as you wish. At the same time, it maintains its stability even at higher speeds or when changing direction.

Fritschi Tecton 12

The first freeride binding that combines the safety and riding properties of a downhill binding with the light weight and walking comfort of a ski mountaineering binding.
The Fritschi Tecton 12 binding is designed for freeriders who demand uncompromising ride characteristics, high safety and low weight for off-piste virgin snow ascents. Fritschi Tecton 12 is the first freeride spike binding with a safety tip and the stiffest downhill heel on the market . For all those who are looking for bindings for the slopes and pedaling, but do not want to compromise on factors such as safety or binding stiffness and driving characteristics.

The main advantages of the Fritschi Tecton 12 binding:

• It turns off reliably and with Swiss precision only at the moment of a fall, not when the terrain is uneven (the toe and heel of the binding can absorb shocks thanks to dynamic elasticity).
• It also switches off in walking mode – when buried by an avalanche, loss of balance during ascent or falling during short descents on tracks.
• Rigid downhill heel for perfect transmission of forces from the legs to the skis - perfect downhill properties.
• The sliding heel adapts to the bending of the ski.
• Possibility to switch from walking mode to downhill mode without untying the shoes.
• Controlling the tying with a mallet or with a simple twist is a bonus that will make an all-day hike more enjoyable .

Pedaling and yet downhill binding

Downhill bindings are proven and their heel construction is unsurpassed, and that's where the Fritschi Tecton 12 comes from. Its rigid, non-rotating heel without a joint has no play and enables direct transfer of ski forces to each edge of the ski. Thus, better controllability and driving safety are achieved. Better transmission of forces is also achieved by:

• the spoon is pressed by the jaw of the heel on a large area,
• the grooves in the heel fit into the inserts on the shoe and thus increase the lateral stiffness of the binding,
• I lean the ski boot on the heel pad,
• large screw spacing,
• by attaching the heel directly to the ski,
• large and wide contact area under the toe and heel.

The heel of the binding is loaded with 4x more force than the toe when riding, which is why the Tecton 12 has a sensitive toe and a stiff (downhill) heel. Thanks to the precise transfer of the load to the edge of the ski, you will fully enjoy your ride.

Really stiff heel for a perfect riding experience

The spoon does not move even a millimeter in the heel thanks to the Power Rail grooves, which protrude from the heel and fit exactly into the grooves in the ski boot intended for the rear binding tips. In this way , the spoon is fixed in the vertical and horizontal direction and your every movement is transferred from the ski boot to the ski without loss of energy. Thanks to this, you will be able to control the skis perfectly and have the much-needed confidence when driving. This will be appreciated not only by every good rider, but also by a beginner who is still getting used to free terrain.

Excellent skiing thanks to the active heel

The active sliding heel adapts to the ski boot by up to 10 mm when the ski bends during the ride and enables smooth bending of the ski along its entire length, which is a necessary feature of the binding for perfect skiing. A binding that does not have an active heel will cause the ski to bend, the center will stiffen, and the ski will bend only before and behind the binding, which significantly worsens its driving characteristics. Fritschi has eliminated this problem, which is why the Tecton 12 binding is also great for all-day skiing in the resort.

The highest safety for spike bindings

The Fritschi Tecton 12 ski mountaineering binding is based on the design of a downhill binding, where the toe switches off to the sides according to the DIN switch-off force setting . Thanks to this, it shuts off precisely under rotational forces and does not cause torsional fractures. Health and safety is the main principle that the Swiss manufacturer Fritschi deals with in the development of its products. Safety is more important than weight.

Only turns binding off when you really need it

With classic spike bindings, it is easy to accidentally switch off during a descent, which can have fatal consequences on steep descents. The construction solution of both the tip and the foot of the Tecton 12 binding has a dynamic elasticity of 13 mm or 8 mm, which in other words can be thought of as clearance to absorb forces arising from driving over bumps or sudden impacts. Even when driving vigorously on hard or heavy snow , there is no unwanted shutdown.

• The Fritschi Tecton 12 doesn't shut off too soon, but only after overcoming 13 mm of lateral travel in the toe and 9 mm up in the heel.
• This path is sufficient to consume energy so that the binding does not switch off unintentionally after a short-term exceedance of the set tripping force DIN - in the event of a jump or bumping into an unevenness.
• The binding also switches off with the toe set for walking – an important feature when buried in an avalanche, losing balance during ascent or falling on short descents on tracks.

The Fritschi Tecton 12 binding has the same dynamic elasticity as downhill bindings, which the Fritschi company has produced for more than 30 years and today uses this know-how in the development of skialp bindings.

Safe and lightweight freetour binding

The weight of the equipment is also important, which is why the Fritschi Tecton 12 binding is made of modern polymers. From design to production, everything takes place in Switzerland. Polymers are lighter than metal parts and at the same time have higher strength and durability. Although light weight is very important, the Fritschi brand always prioritizes safety and reliability.

Easy to turn on even on a steep slope

The new generation Fritschi Tecton 12 has an innovative tip that you can "kick" even blindly because it has:

• stops from below,
• stops from the sides,
• stop on the tip of the ski boot,
• sensitive trigger.

Thanks to this, when the toe ski is turned on, the ski is precisely guided into the correct position - it is located between the spikes and a sensitive trigger, and even with a little pressure it releases the spikes, which fit exactly into the inserts in the ski boot.

Binding properties

• Comfortable control with a mallet or with bent knees - you can comfortably switch the binding to the rising position and adjust the heel with the mallet. Switching to downhill is possible. The Fritschi Tecton 12 binding can be controlled with just the mallet without having to bend down to bind.
• Switching from downhill to ascent without turning off the spoon - you can comfortably switch from downhill to walking with the Tecton 12 binding by lifting the heel and thus moving the heel backwards. You will appreciate this during ridge hikes, short passages of descent during the ascent, when it is safer on the belts to turn your heel into the downhill position.
• It does not freeze - the Fritsichi Tecton 12 ski binding is designed so that snow does not get into it, which could compress and turn into ice. Therefore, the binding works reliably in any snow and temperature.
• Adjustable pins for different types of ski boots - pin ski boots do not have standardized dimensions, and therefore the tip width is different for different models and manufacturers. Tecton has one adjustable pin to fit your specific shoe model. The heel of the binding is also adjustable by up to 25 mm. The binding is not compatible with "noseless" spoons TLT 7, TLT 8, DNA, PDG, Arcteryx Procline, and all that have a shank shorter than 6 mm, such as Atomic Backland
• Drilling for any skis - Fritschi Tecton 12 has easily replaceable brakes and thanks to this it is possible to drill the binding for any other skis.
• Harshajzny - the binding is compatible with Harshajznym and there is no need to switch off the binding when putting them on. The binding is also adapted to use a safety line.

KOHLA FREERIDE AIR Mixmohair

Upgraded climbing belts with the new Smart Glue adhesive. Thanks to the "alá corduroy" grooves, the belt is even easier to handle, has better sliding, lower weight and better packability. The vulcanized technology has a longer life and the belt does not absorb water. Compatible with all skis - length up to 200 cm and attachment to any ski.
Fresh powder and groomed slopes in the mountain resort. KOHLA FREERIDE AIR Mixmohair Universal belts will allow you to get your dream lines all day long and again and again. Even if you stick them several times a day, they will not let you down. These risers are suitable for any snow. With a width of 135 mm, you can easily adapt them to any ski model, including twin-tips. With the new Smart Glue adhesive technology, handling the strips will be much easier - they stick well and for a long time, the strips are easy to peel apart. If you are looking for reliable risers for really wide skis for freeride and freetouring, read on.

• Material of rising layer: Mixmohair
• Adhesive layer material: Smart Glue
• Version: Universal
• Supplied widths: 140 mm
• Supplied for lengths: up to 200 cm
• Temperature: -30 °C
• Membrane: No, vulcanized layer - 100% waterproof
• Impregnation: Yes - fluorocarbon
• Can be trimmed for any ski: Yes
• Included in the package: bag, trimming knife, Universal set for attaching the classic and twintip foot

Smart Glue – newly developed glue

One of the things that you need with skialp belts is that the adhesive (adherent) layer holds firmly on the slide even in the most demanding conditions. The Austrian manufacturer KOHLA is a leader in adhesive layer technologies and is constantly improving and innovating them. The proof is the newly developed Smart Glue, which you can really rely on and it holds great even in really cold weather.

Excellent slide

Climbing belts KOHLA FREERIDE AIR Mixmohair Universal are fast, have an excellent slide, will not slow you down in fast movement and save much needed energy for the descent. This is thanks to the mohair used and the method of braiding the fibers:

• mohair fibers, their cut and quality, are chosen exactly so that they are fast and have the best possible glide even on variable snow
• the belt has "corduroy" grooves in it, which also contribute to better sliding
• the fibers have a special treatment that improves the glide even more
• the use of a longer fiber significantly increases the resistance and life of the belt while maintaining a very fast slide.

Grooves like in corduroy

The belt has regular grooves along its length, thanks to which it will be more comfortable for you to climb even on really wide skis. The structure seems like that of a well-known maestro. Reducing the amount of fibers will not only make the slide easier, but you will also save important weight when going uphill with heavier freeride equipment. At the top, you can pack the belt more easily and it won't take up so much space in your backpack or under your jacket. Thanks to all this, you will manage one more great downhill.

It holds firmly even in spring weather

In order for the climbing belt to reliably hold on the slide, both the slide and the adhesive layer must be dry. If moisture from the snow gets on the glue, it stops working, peels off, freezes and doesn't hold. For this reason, these climbing belts KOHLA FREERIDE AIR Mixmohair Universal use vulcanization technology, in which the fiber is directly sealed into the bottom layer and the belt is therefore 100% waterproof. So you can enjoy your ski tour without worries, because the glue holds firmly, does not freeze and works great even in spring winters on wet snow.
Belts with vulcanized technology have a longer lifespan, because the hair is woven into the fabric and at the same time baked into the underlying rubber. Thanks to this, the belt does not get wet and has a significantly higher grip in demanding spring conditions.

Impregnated climbing belts

Good risers must hold well on the skis and glide well on the snow. Wet snow can stick to wet tracks, and there is nothing more annoying than having to drag half a kilo of snow on your leg. The belts stop sliding, it takes a lot of force unnecessarily. All KOHLA climbing belts are impregnated with fluorocarbon and snow does not stick to them.

• The impregnation repels moisture and thus prevents snow from sticking to the fibers.
• The impregnation improves the glide - climbing belts are faster and movement is easier.
• Impregnation increases the resistance of the fibers - climbing belts last longer.
• Climbing belts dry faster.
• The impregnation is environmentally friendly - without solvents and toxic substances and is biodegradable.

Still like new

With frequent use or after several seasons, the impregnation effect may decrease. In this case , you can easily renew it with KOHLA DRY CLIMB skin impregnation spray or KOHLA impregnation wax. The wax is small and convenient to have on a hike in a backpack, especially for a several-day transition.

Gender: Unisex