Black Crows S169 Atris set, 105 mm + straps, T13 binding

Complete downhill set with mounted binding

Don't you want to deal with mounting bindings and drilling into skis? When you get the set, everything is done, you just set it comfortably on your shoe and you can go. The binding is drilled on a rental pad, which allows a size range of 285-345 mm.

Skis black crows Atris 22/23

Since 2014, atris belongs to the big mountain family from black crows. Now it has reached its third edition and has gained a lower weight, a more friendly flex and even more versatility. If you don't ride for the conditions, or you want to enjoy freetouring further from the resort, you will appreciate this particular ski. This everyday freeride ski allows you to make long and fast turns in powder, but it won't get lost even on a broken slope or on a piste. A firm and constant flex along the entire length of the ski, a 20m radius and a medium-long classic camber in the middle will bring you stability at speed. Thanks to the progressive rocker on the tip and heel, you can easily control the ski and it also allows you to pivot easily. Even in deep snow, the ski has excellent buoyancy and excellent grip on hard surfaces.

A broken slope or tight spots will be a breeze

• Firm and constant flex - maintains stability in the arch, but also enables quick and easy feeding
• Progressive tip - enables easy pivoting - you can easily turn the ski into an arc even in broken terrain.
• Rocker on the tip and heel - shortens the contact surface of the ski - you can easily start the arc.

You will enjoy the long fast arc

• Classic middle camber - increases stiffness in the middle of the ski - you will feel stable even on the edge.
• 20 m radius - you will feel the confidence of guiding the ski in a long, fast arc
• Fiberglass reinforcement - the ski on the edge will not jump from vibrations and will allow you to drive dynamically.
• Poplar core – absorbs vibrations and provides peace of mind to the skis, which hold perfectly even when the snow changes or when crossing unevenness.

You can ski through deep snow and a hard board with confidence

• Progressive rocker on the tip - creates buoyancy - in deep snow you float to the surface and enjoy easy control of the ski.
• Width 105 mm – an ideal compromise between good buoyancy and comfortable feeding.
• Classic middle camber - center bias with excellent grip - your skis won't shoot you on the ice.
• Fiberglass reinforcement - the ski has high torsional stiffness - on a hard surface you will carve one arc after another with complete confidence.

Enjoy a greater driving experience thanks to easy control

If you enjoy endorphin addiction and can't wait to put on your ski boots again in the evening, atris is exactly for you. With this model, you will enjoy big lines and the resort, but they will also allow you to pedal away in search of the best powder in the area. Atris is a dynamic ski with maximum ease of control, which will enable you to ride safely, precisely, stably and playfully under any conditions.

Fritschi Tecton 13 binding

The first freeride binding that combines the safety and riding properties of a downhill binding with the light weight and walking comfort of a ski mountaineering binding. Now reinforced with carbon and glass fibers.
The Fritschi Tecton 13 binding is intended for freeriders who demand uncompromising driving characteristics, high safety and low weight for off-piste virgin powder. Fritschi Tecton 13 is the first freeride spike binding with a safety tip and the stiffest downhill heel on the market . For all those who are looking for bindings for the slopes and pedaling, but do not want to compromise on factors such as safety or binding stiffness and driving characteristics.

The main advantages of the Fritschi Tecton 13 binding:

• It turns off reliably and with Swiss precision only at the moment of a fall, not when the terrain is uneven (both the toe and the heel of the binding can absorb shocks thanks to dynamic elasticity).
• It switches off purposefully even in walking mode - when covered by an avalanche, loss of balance during ascent or falling during short descents on tracks.
• Rigid downhill heel for perfect transmission of forces from the legs to the skis - perfect downhill properties.
• The sliding heel adapts to the bending of the ski, so you can use its full potential.
• Possibility to switch from walking mode to downhill mode without untying the shoes.
• Controlling tying with a mallet or in a simple curl is a bonus that will make the whole day's hike more pleasant .

Pedaling and yet downhill binding

Downhill bindings are proven and their heel construction is unsurpassed, and that's where the Fritschi Tecton 13 comes from. Its rigid, non-rotating heel without a joint has no play and enables direct transfer of the skis to the edge of the ski. Thus, better controllability and driving safety are achieved. Furthermore, a better transmission of forces is also achieved by means of:

• the spoon is pressed by the jaw of the heel on a large area,
• the grooves in the heel fit into the inserts on the shoe and thus increase the lateral stiffness of the binding,
• I lean the ski boot on the heel pad,
• large screw spacing,
• by attaching the heel directly to the ski,
• large and wide contact area under the toe and heel.

The heel of the binding is loaded with 4x more force than the toe when riding, and that is why the Tecton 13 has a sensitive toe and a stiff (downhill) heel. Thanks to the precise transfer of the load to the edge of the ski , you will fully enjoy your ride.

Really stiff heel for a perfect riding experience

The spoon does not move even a millimeter in the heel thanks to the Power Rail grooves, which protrude from the heel and fit exactly into the grooves in the ski boot intended for the rear binding tips. In this way , the spoon is fixed in the vertical and horizontal direction and your every movement is transferred from the ski boot to the ski without loss of energy. Thanks to this, you will be able to control the skis perfectly and have the much-needed confidence when driving. This will be appreciated not only by every good rider, but also by a beginner who is still getting used to free terrain.

Excellent skiing thanks to the active heel

The active sliding heel adapts to the ski boot by up to 10 mm when the ski bends during the ride and enables smooth bending of the ski along its entire length, which is a necessary feature of the binding for perfect skiing. A binding that does not have an active heel will prevent the ski from bending, stiffening the middle, and the ski will bend only before and behind the binding, which significantly worsens its driving characteristics. Fritschi has eliminated this problem, which is why the Tecton 13 binding is also great for all-day resort skiing.

The highest safety for spike bindings

The Fritschi Tecton 13 ski mountaineering binding is based on the design of a downhill binding, where the toe switches off to the sides according to the DIN switch-off force setting . Thanks to this, it shuts off precisely under rotational forces and does not cause torsional fractures. Health and safety is the main principle that the Swiss manufacturer Fritschi deals with in the development of its products. Safety is more important than weight.

Only turns binding off when you really need it

With classic spike bindings, it is easy to accidentally switch off during a descent, which can have fatal consequences on steep descents. The construction solution of the toe and foot of the Tecton 13 binding has a dynamic elasticity of 13 mm or 9 mm, which in other words can be imagined as clearance to absorb the forces arising from driving over bumps or sudden impacts. Even when driving vigorously on hard or heavy snow , there is no unwanted shutdown.

• The Fritschi Tecton 13 doesn't shut off too soon, but only after overcoming 13 mm of lateral travel at the toe and 9 mm up at the heel.
• This path is sufficient to consume energy so that the binding does not switch off unintentionally after a short-term exceedance of the set tripping force DIN - in the event of a jump or bumping into an unevenness.
• The binding switches to the side even with the toe set for walking - an important feature when buried in an avalanche, losing balance during ascent or falling on short descents on tracks.

The dynamic elasticity of the Fritschi Tecton 13 binding is the same as the downhill binding that the Fritschi company has been producing for over 30 years and today uses this know-how in the development of skialp bindings.

Safe and lightweight freetouring binding

The weight of the equipment is also important, which is why the Fritschi Tecton 13 binding is made of carbon and fiberglass, now complemented by proven modern polymers. From design to production, everything takes place in Switzerland. Polymers reinforced with carbon and fiberglass are lighter than metal parts and at the same time have higher strength and durability. Although light weight is very important, the Fritschi brand always prioritizes safety and reliability.

Easy to turn on even on a steep slope

The new generation Fritschi Tecton 13 has an innovative designed tip that you can "kick" even blindly because it has:

• stops from below,
• stops from the sides,
• stop on the tip of the ski boot,
• sensitive trigger.

Thanks to this, when the toe ski is turned on, the ski is precisely guided into the correct position - it is located between the spikes and a sensitive trigger, and even with a little pressure it releases the spikes, which fit exactly into the inserts in the ski boot.

Other key binding properties

• Comfortable control with a mallet or with bent knees - you can comfortably switch the binding to the rising position and adjust the heel with the mallet. To switch to downhill, the binding of the Fritschi Tecton 13 can be controlled with just the wand without the need to bend over to bind.
• Switching from downhill to ascent without turning off the spoon - you can comfortably switch from downhill to walking with the Tecton 12 binding by lifting the heel, when the entire heel is subsequently pushed back. You will appreciate this during ridge hikes or short passages of descent during the ascent, when it is safer to turn your heel into the downhill position on the belts.
• It does not freeze - the Fritsichi Tecton 13 ski binding is designed so that snow does not get into it, which could compress and turn into ice. Therefore, the binding works reliably in any snow and temperature.
• Adjustable binding dimensions – The heel of the binding is adjustable up to 25 mm (60 mm when using a rental mat). The binding is not compatible with "noseless" spoons TLT 7, TLT 8, DNA, PDG, Arcteryx Procline, and all that have a shank shorter than 6 mm, such as Atomic Backland (an extension is required here).
• Drilling for any ski - Fritschi Tecton 13 has easily replaceable brakes (80/90/100/110/120mm) and thanks to this it is possible to drill the binding for any other ski.
• Harshajzny - the binding is compatible with Harshajznym and there is no need to switch off the binding when putting them on. The binding is also adapted to use a safety line.

Kohla Freeride belts

Climbing strips with the new Smart Glue They are easy to handle and stick in a wide range of temperatures. The vulcanized technology has a longer life and the belt does not absorb water. Compatible with all skis.
Fresh powder and groomed slopes in the mountain resort. KOHLA FREERIDE Mixmohair belts will allow you to go down all day and again and again your dream lines. Even if you stick them several times a day, they will not let you down. These risers are suitable for any snow. With a width of 135 mm, you can easily adapt them to any ski model, including twin-tips. With the new Smart Glue adhesive technology, handling the strips will be much easier - they stick well and for a long time, the strips are easy to peel apart. If you are looking for reliable climbing belts for freeride and freetouring, read on.

• Material of rising layer: Mixmohair
• Adhesive layer material: Smart Glue
• Version: Multifit
• Supplied widths: 135 mm
• Available lengths: 149-155 cm, 156-162 cm, 163-169 cm, 170-176 cm, 177-183 cm, 184-190 cm, 191-197 cm
• Temperature: -30 °C
• Membrane: No, vulcanized layer - 100% waterproof
• Impregnation: Yes - fluorocarbon
• Can be trimmed for any ski: Yes
• Package includes: bag, cutting knife

Smart Glue – newly developed glue

One of the things that you need with skialp belts is that the adhesive (adherent) layer holds firmly on the slide even in the most demanding conditions. The Austrian manufacturer KOHLA is a leader in adhesive layer technologies and is constantly improving and innovating them. The proof is the newly developed Smart Glue, which you can really rely on and it holds great even in really cold weather.

• When gluing ski mountaineering belts with Smart Glue glue, you do not need to use a separation film and you only need 60% of the force to unglue compared to standard belts.

Excellent slide

The climbing belts KOHLA FREERIDE Mixmohair are fast, have an excellent slide, will not slow you down in fast movement and will save the energy so necessary for the descent. This is thanks to the mohair used and the method of braiding the fibers:

• mohair fibers, their cut and quality, are chosen exactly so that they are fast and have the best possible glide even on variable snow
• the fibers have a special treatment that improves the glide even more
• the use of a longer fiber significantly increases the resistance and life of the belt while maintaining a very fast slide.

It holds firmly even in spring weather

In order for the climbing belt to reliably hold on the slide, both the slide and the adhesive layer must be dry. If moisture from the snow gets on the glue, it stops working, peels off, freezes and doesn't hold. For this reason, these climbing belts KOHLA FREERIDE Mixmohair use vulcanization technology, in which the fiber is directly sealed into the bottom layer and the belt is therefore 100% waterproof. So you can enjoy your ski tour without worries, because the glue holds firmly, does not freeze and works great even in spring winters on wet snow.
Belts with vulcanized technology have a longer lifespan, because the hair is woven into the fabric and at the same time baked into the underlying rubber. Thanks to this, the belt does not get wet and has a significantly higher grip in demanding spring conditions.

Impregnated climbing belts

Good risers must hold well on the skis and glide well on the snow. Wet snow can stick to wet tracks, and there is nothing more annoying than having to drag half a kilo of snow on your leg. The belts stop sliding, it takes a lot of force unnecessarily. All KOHLA climbing belts are impregnated with fluorocarbon and snow does not stick to them.

• The impregnation repels moisture and thus prevents snow from sticking to the fibers.
• The impregnation improves the glide - climbing belts are faster and movement is easier.
• Impregnation increases the resistance of the fibers - climbing belts last longer.
• Climbing belts dry faster.
• The impregnation is environmentally friendly - without solvents and toxic substances and is biodegradable.

Still like new

With frequent use or after several seasons, the impregnation effect may decrease. In this case , you can easily renew it with KOHLA DRY CLIMB skin impregnation spray or KOHLA impregnation wax. The wax is small and convenient to have on a hike in a backpack, especially for a several-day transition.

Gender: UNISEX