Fritschi Tecton 13 ski mountaineering binding

Fritschi Tecton 13 Ski mountaineering binding | 100mm

The Fritschi Tecton 13 binding is intended for freeriders who demand uncompromising driving characteristics, high safety and low weight for off-piste virgin powder. Fritschi Tecton 13 is the first freeride spike binding with a safety tip and the stiffest downhill heel on the market. For all those who are looking for bindings for the slopes and pedaling, but do not want to compromise on factors such as safety or binding stiffness and driving characteristics.

The main advantages of the Fritschi Tecton 13 binding:

• It turns off reliably and with Swiss precision only at the moment of a fall, not when the terrain is uneven (the toe and heel of the binding can absorb shocks thanks to dynamic elasticity).
• It switches off purposefully even in walking mode - when buried by an avalanche, loss of balance during ascent or falling during short descents on tracks.
• Stiff downhill heel for perfect transfer of forces from the legs to the skis - perfect downhill properties.
• The sliding heel adapts to the bending of the ski, so you can use its full potential.
• Option to switch from walking mode to downhill mode without untying the shoes.
• Controlling the binding with a mallet or in a simple crouch is a bonus that will make an all-day hike< strong> more enjoyable.

Pedaling and yet downhill binding

Downhill bindings are proven and their heel construction is unsurpassed, and that's where the Fritschi Tecton 13 comes from. Its rigid, non-rotating heel without a joint has no play and enables the direct transfer of forces from the ski boot to the edge of the ski. Thus, better controllability and driving safety are achieved. Furthermore, better transmission of forces is also achieved by means of:

• the ski boot is pressed by the jaw of the heel on a large surface,
• the grooves in the heel fit into the inserts on the shoe and thus increase the lateral stiffness of the binding,
• I lean the ski boot on the heel pad,
• large screw spacing,
• by attaching the heel directly to the ski,
• large and wide contact area under the toe and heel.

The heel of the binding is loaded with 4x more force than the toe when riding, and that is why the Tecton 13 has a sensitive toe and a stiff (downhill) heel. Thanks to the precise transfer of the load to the edge of the ski , you will fully enjoy your ride.

Really stiff heel for a perfect riding experience

The ski boot does not move even a millimeter in the heel thanks to the Power Rail grooves that protrude from the heel and fit exactly into the grooves in the ski boot designed for the rear binding spikes. In this way , the ski boot is fixed in both the vertical and horizontal direction, and your every movement is transferred from the ski boot to the ski without loss of energy. Thanks to this, you will be able to control the skis perfectly and have the much-needed confidence when driving. This will be appreciated not only by every good rider, but also by a beginner who is still getting used to free terrain.

Excellent skiing thanks to the active heel

The active sliding heel adapts to the skier by up to 10 mm when the ski is bent while driving and enables smooth bending of the ski along its entire length, which is a necessary feature of the binding for perfect skiing. A binding that does not have an active heel will prevent the ski from bending, stiffening the middle, and the ski will bend only before and behind the binding, which significantly worsens its driving characteristics. Fritschi has eliminated this problem, which is why the Tecton 13 binding is also great for all-day resort skiing.

The highest safety for spike bindings

The Fritschi Tecton 13 ski mountaineering binding is based on the design of a downhill binding, where the toe switches off to the sides according to the DIN switch-off force setting . Thanks to this, it shuts off precisely under rotational forces and does not cause torsional fractures. Health and safety is the main principle that the Swiss manufacturer Fritschi deals with in the development of its products. Safety is more important than weight.

Only turns binding off when you really need it

With classic spike bindings, it is easy to accidentally switch off during a descent, which can have fatal consequences on steep descents. The construction solution of both the tip and the foot of the Tecton 13 binding has a dynamic elasticity of 13 mm or 9 mm, which in other words can be imagined as clearance to absorb the forces arising from driving over bumps or sudden impacts. Even when driving vigorously on hard or heavy snow , there is no unwanted shutdown.

• The Fritschi Tecton 13 doesn't shut off too soon, but only after overcoming 13 mm of lateral travel at the toe and 9 mm up at the heel.
• This path is sufficient to consume energy so that the binding does not switch off unintentionally after a short-term exceedance of the set tripping force DIN - in the event of a jump or bumping into an unevenness.
• The binding switches to the side even with the toe set for walking - an important feature when buried in an avalanche, losing balance during ascent or falling on short descents on tracks.
• ul>
  

  The dynamic elasticity of the Fritschi Tecton 13 binding is the same as the downhill binding that the Fritschi company has been producing for over 30 years and today uses this know-how in the development of skialp bindings.

  Safe and lightweight freetouring binding

  The weight of the equipment is also important, which is why the Fritschi Tecton 13 binding is made of carbon and fiberglass, now complemented by proven modern polymers. From design to production, everything takes place in Switzerland. Polymers reinforced with carbon and fiberglass are lighter than metal parts and at the same time have higher strength and durability. Although light weight is very important, the Fritschi brand always prioritizes safety and reliability.

  Easy to turn on even on a steep slope

  The new generation Fritschi Tecton 13 has an innovative designed tip that you can "kick" even blindly because it has:

  • stops from below,
  • stops from the sides,
  • stop on the tip of the ski boot,
  • sensitive trigger.

  Thanks to this, the tip of the ski boot is precisely guided to the correct position when it is turned on - it is located between the spikes and a sensitive trigger, and even with a little pressure it releases the spikes, which fit exactly into the inserts in the ski boot.

  Other key binding properties

  • Comfortable control with a mallet or with bent knees - you can conveniently switch the binding to the rising position and adjust the heel with a wand. To switch to downhill, the binding of the Fritschi Tecton 13 can be controlled with just the wand without the need to bend over to bind. walking by lifting the heel, when the whole heel is subsequently pushed back. You will appreciate this during ridge hikes or short passages of descent during the ascent, when it is safer to turn your heel into the downhill position on the belts. , so that snow does not get into it, which could compress and turn into ice. Therefore, the binding works reliably in any snow and temperature.
  • Adjustable binding dimensions – The heel of the binding is adjustable up to 25 mm (60 mm when using a rental pad). The binding is not compatible with "noseless" ski boots TLT 7, TLT 8, DNA, PDG, Arcteryx Procline, and all that have a heel shorter than 6 mm, such as Atomic Backland (an extension is required here).
  • Drilling for any ski - Fritschi Tecton 13 has easily replaceable brakes (80/ 90/ 100/ 110/ 120mm) and thanks to this it is possible to drill the binding for any other ski.
  • Harshajzny - the binding is compatible with Harshajzny and there is no need to switch off the binding when putting them on. The binding is also adapted to use a safety rope.

  All product videos and instructions.

  Warranty and quality post-warranty service

  For binding Fritschi Tecton 13 purchased in the Czech Republic from authorized dealers, we provide a 3-year warranty, post-warranty service and availability of parts for at least 10 years.< /strong> Spare parts are in stock in the Slovak Republic.

  • Availability of spare parts for at least 10 years.
  Color: Blue
  Safety heel: No
  Safety tip: Yes
  pin binding: Yes
  Number of heels: 2
  Size: 100
  Manufacturers: Fritschi