Marin Rift Zone Carbon 2 29 bike, blue/carbon, test
Choose in-person pick-up at the store and decide on the spot.
Marin Rift Zone Carbon 2 29 bike
We are releasing our rental bikes for sale. They have some mileage, but you don't have to worry about their condition. Each unit has been through the hands of our mechanics:- Suspension service (fork and shock)
- Replacement of worn components
- Complete adjustment and lubrication
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Unidirectional Carbon Fibre Front Triangle, Series 4 Alloy Rear End, 29" Wheels, 125 mm Travel, MultiTrac Suspension Platform, 148x12 mm Boost Thru-Axle, 73 mm Threaded BB w/ ISCG05 Tabs
|
| Fork |
Fox Performance 34 Float, 130 mm Travel, 3-Position Micro Adjust Compression Adjustment, Rebound Adjustment, 110x15 mm Kabolt Axle, 44 mm Offset
|
| Shock |
Fox Float with Reservoir, Performance Series, EVOL Air Spring, Climb Switch, Rebound Adjustment, Custom Tune, 210x50 mm, M8x30 mm Top, M8x25 mm Bottom
|
| Shifting |
Shimano SLX 12-speed, I-Spec EV
|
| Rear derailleur |
Shimano XT, 12-speed, SGS
|
| Cassette |
Shimano SLX M7100, 12-speed, 10-51T
|
| Chain |
KMC X-12 Silver and Black
|
| Cranks |
FSA Gradient, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Mego EXO Spindle, Boost Spacing
|
| Brakes |
Shimano SLX, 4-Piston Hydraulic Disc, Brake 203/180 mm mm Rotor
|
| Brake levers |
Shimano SLX Hydraulic, I-Spec EV
|
| Rims |
Marin Aluminium Double Wall, 29 mm Inner, Welded Joint, Disc Specific, Tubeless Compatible
|
| Front hub |
Shimano, 110x15 mm, Disc, 32H
|
| Rear hub |
Shimano, Microspline 148x12 mm, Disc, 32H
|
| Tires |
front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO, Tubeless Compatible
rear: Maxxis Aggressor 29x2.5", 3C Maxx Terra, EXO, Tubeless Compatible |
| Seat post |
TranzX, YSP23JL, 1x Remote, S: 125 mm, ML: 150 mm, XL: 170 mm, Ø 30.9 mm
|
| Saddle |
Marin Trail Speed Concept Pro
|
| Stem |
Marin CNC Stem, 35 mm, Ø 35 mm Bar Bore
|
| Handlebars |
Marin 35 mm 7000 Alloy Bar, 780 mm width, 5° upsweep, 8° backsweep
|
| Grips |
All New Marin Single Clamp Locking
|
| Headset |
FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Bottom bracket |
MEGAEVO BB, 73 mm BSA Threaded
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX |
| Colour | blue/carbon |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 130 mm |
| Rear travel | 125 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 387036 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 165 cm | 165 - 178 cm | 178 - 188 cm | 188 - 193 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































There are currently no reviews