Fenix WT25R LED flashlight

Fenix WT25R is a versatile rechargeable work flashlight with a unique articulated construction with a tilting reflector, equipped with a Cree XP-L HI LED with a luminous flux of up to 1000 lumens and a beam distance of up to 220 meters (ANSI). The head tilts in a range of 105 degrees, ensuring maximum versatility. The Fenix WT25R flashlight is also equipped with a sturdy steel clip for easy carrying on a belt or workwear, and a magnetic tail cap, thanks to which the light can be easily attached to any ferrous surface. Its variability makes the flashlight particularly useful for work, camping, outdoor activities, and many other pursuits.

The flashlight is powered by a 18650 Lithium-ion battery with a capacity of 3400 mAh, which is included in the package and is charged via a USB cable with a magnetic connector directly in the flashlight. Fenix WT25R features six lighting modes, including strobe and SOS signal, allowing users to choose a suitable compromise between illumination intensity and runtime. Despite all its functionality, the flashlight maintains minimal dimensions and a low weight of 137 grams, including the battery.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix WT25R LED work flashlight

• Equipped with a powerful Cree XP-L HI LED with a lifespan of 50,000 hours of use.
• Six output modes:
  
  • Constant modes: 1000 lumens (3.66 hours) -> 400 lumens (4.83 hours) -> 150 lumens (11 hours) -> 50 lumens (29 hours).
  • Strobe modes: strobe (1000 lumens) -> SOS signal (50 lumens).
• Digitally regulated for constant brightness, the electronics remember the last set mode.
• Uses one Fenix 18650 Lithium-ion battery with a capacity of 3400 mAh.
• Battery level indication.
• Charging via a magnetic connector on the flashlight.
• Textured reflector for a light beam with a throw of 220 meters (11905 cd).
• Made from hardened aircraft-grade aluminum and impact-resistant plastic.
• Metal parts treated with hard HA-III anodization.
• Dimensions 13.53 cm (length) x 2.94 cm (width) x 2.41 cm (height).
• Weight 137 grams (including battery).
• Electronics with reverse polarity protection.
• Impact resistant from a drop of 1 meter.
• Waterproof according to IP66 standard.
• Magnetic tail cap - the flashlight can be attached to any ferrous surface.
• Hardened ultra-clear glass lens with anti-reflective coating.
• Can stand on its own on a flat surface, the head can be tilted 105° in several steps.
• Package includes: flashlight with Fenix 18650 3400 mAh rechargeable battery, USB cable with magnetic connector, wrist lanyard, spare O-ring.
• Optional accessories include a USB AC adapter and a USB car adapter.

Usage of the Fenix WT25R LED flashlight

The flashlight is turned on and off by holding the button for 0.5 seconds. Once on, modes are switched by a short press of the button. To switch to strobe, hold the button for 1.2 seconds; a subsequent short press will activate the SOS signal. The flashlight remembers the last selected mode (except for strobe modes).

The control button can be locked to prevent accidental activation, e.g., during transport in luggage. Double-click the control button quickly (within 0.5 seconds); the flashlight will flash twice to indicate it is locked. To unlock, double-click the button quickly again.

Overheat protection: Due to the high output of 1000 lumens, the flashlight's temperature will rise during prolonged use in the highest mode. If the temperature exceeds 60 °C, the output will automatically decrease. Once the temperature drops below 60 °C, the highest output can be used again.

Charging: Connect the charging cable to a USB port on a computer, AC adapter, or car adapter. Bring the cable close to the charging pad on the flashlight; it will attach magnetically. The indicator light on the cable glows red during charging and turns green when charging is complete. Charging a fully depleted Fenix ARB-L18-3400 battery takes approximately 4.5 hours.

Battery level indication (works only with the original battery): A short press of the button (flashlight must be off) activates the LED battery level indicator in the button. Four illuminated LEDs indicate the battery is charged to over 80%, three illuminated indicate 60-80%, two indicate 40-60%, one indicates 20-40%, and one flashing LED indicates the battery is charged to less than 20%.

Notice:

• Do not disassemble the sealed part in the flashlight head yourself, as this will void the warranty.
• If the protective rubber O-rings appear damaged after prolonged use, replace them. The O-rings should also be lubricated to prevent rubber erosion. Proper maintenance of these parts will ensure the flashlight's water protection.
• If the flashlight flickers or does not turn on, it may be due to one of the following reasons:
  
  • The battery is depleted; please charge it.
  • The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.

Warranty:

Five-year warranty on the flashlight, two years on the battery.

Max output: 1000 lm
Max runtime: 29 hr
Weight: 137 g
Number of modes: 6
Beam distance: 220 m
Power source: 1x 18650
Charging: USB rechargeable
Light source: Cree XP-L HI
Waterproof: IP66 (heavy rain)