Fenix WF05E ATEX flashlight

Professional flashlight Fenix WF05E with ATEX certification for use in explosive environments. The flashlight is powered by two micro-battery (AAA) batteries and provides a luminous flux of up to 85 lumens. The flashlight body is made of aluminum alloy for high durability and impact resistance, and the clip is made of antistatic plastic. The flashlight is designed primarily for firefighters, rescuers, use in chemical, oil, textile, and metallurgical plants, and other areas where ordinary lights cannot be used. Its shape resembles a pen and can thus be carried, for example, in a chest pocket. The flashlight is not intended for use in mines.

Certificates:

• Usable in zones 1-2 of explosive gases and in zones 21-22 of explosive dust
• Full text of the certificate:
  
  • IECEx: Ex ib IIC T4 Gb, Ex ib IIIC T130°C Db IP66/IP68
  • ATEX: II 2G Ex ib IIC T4 Gb, II 2D Ex ib IIIC T130°C Db IP66/IP68
  • CSA: Ex ib IIC T4 Gb IP66/IP68; Class I, Zone 1, AEx ib IIC T4 Gb
    Ex ib IIIC T130°C Db IP66/IP68, Zone 21, AEx ib IIIC T130°C Db IP66/IP68 

Parameters of the Fenix WF05E explosion-proof flashlight:
 

• Uses a powerful Cree XP-G2 LED with a lifespan of 50,000 hours of illumination.
• Three power modes: 85 lumens (11.5 hours) -> 30 lumens (35 hours) -> 10 lumens (80 hours).
• Uses two micro-battery (AAA) batteries. The manufacturer strongly recommends using only these types of batteries that have been certified for use in the flashlight: Energizer E92, Duracell MN2400, and Panasonic LR03XWA
• Protection against accidental insertion of batteries in reverse (polarity).
• Made of aircraft-grade hardened aluminum, durable surface - Type III hard anodized.
• Knurled surface for better grip.
• Waterproof and dustproof according to IP68 standard.
• Smooth aluminum reflector for a perfect beam with a range of up to 54 meters (724 cd).
• Dimensions 13.45 cm (length) x 1.9 cm (head diameter) x 1.49 cm (body diameter).
• Weight 38 grams (without batteries).
• The package includes two Energizer E92 alkaline micro-battery, which are approved for use in the flashlight, a spare O-ring, and a lanyard.

Usage:

To turn on the flashlight, rotate the reflector clockwise (tighten the head); the flashlight will always turn on in the medium power mode. Rotating in the opposite direction will turn off the flashlight (loosen the head). To change the brightness intensity, quickly turn the flashlight off and on again from the on state. This will switch the flashlight to the next output level.

Warning:

• Perform all service interventions and battery replacements outside the explosive environment!
• Never mix batteries from different manufacturers, of different ages, or with different levels of discharge.
• For long-term storage, we recommend removing the batteries from the flashlight to prevent potential leakage and damage to the flashlight.
• If the protective rubber rings appear damaged after prolonged use, replace them.
• If the flashlight blinks, does not switch to higher power modes, or does not turn on, it may be due to one of the following reasons:
• Batteries are almost depleted - replace them.
• The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.

Warranty

Five-year warranty.

Output:85lm
Max runtime:80h
Beam distance:54m
Number of modes:3
Weight:38g
Power source:2x AAA
Light source:Cree XP-G2
Waterproof:IP68 (2m submersible)