Fenix HT32 flashlight

The hunting flashlight Fenix HT32 with white, red, and green LEDs offers a top-tier luminous flux of up to 2500 lumens in white light and a beam distance of up to 640 meters. The maximum output of green light is 1400 lumens with a beam distance of 210 meters, and the maximum output of red light is 400 lumens with a beam distance of 120 meters. The LEDs from the American manufacturer Luminus are fitted with TIR optics, which create a well-focused beam. Power is supplied by a single 21700 Li-ion battery with a capacity of 5000 mAh and a built-in USB-C connector (battery is included in the package).

The multi-color LED flashlight Fenix HT32 features a total of five white light modes with a runtime of up to 29 hours, including strobe, and two modes for red and green light. The rear of the flashlight has a dual tactical switch, enabling faster and more reliable operation in critical situations. For example, the strobe mode can be instantly activated. The flashlight is compatible with long gun mounts and the AER-05 cable switch. The Fenix HT32 is a top-tier lighting tool for professionals, hunters, and anyone who values durability, high performance, and color lighting options.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix HT32 hunting flashlight

• It uses a premium white Luminus SFT-70 LED, a red SFT-20 RA LED, and a green SFT-20 CG LED with a lifespan of 50,000 hours.
• Nine lighting modes:
  
  • Five white light modes: 2500 lumens (1.8 hours) -> 1000 lumens (2.5 hours) -> 350 lumens (8 hours) -> 50 lumens (29 hours) -> Strobe 2500 lumens
  • Four color light modes: red light 400 lumens (3.25 hours) -> red light 150 lumens (4.8 hours) -> green light 1400 lumens (2.5 hours) -> green light 350 lumens (6 hours).
• Large TIR optics for a focused beam with a range of 640 meters (101,000 cd). Beam distance in red light is 120 meters and in green is 210 meters.
• Electronics with digital output control, reverse polarity protection, and protection against over-discharge of the battery.
• Power is supplied by the included 21700 5000 mAh Li-ion battery with a built-in USB-C connector.
• Dimensions: 16 cm (length) x 5.2 cm (head diameter) x 2.54 cm (body diameter).
• The flashlight has memory and will turn on in the last used mode, except for strobe.
• The flashlight body is made of aircraft-grade hardened aluminum, with the head featuring an impact bezel.
• Durable, hard-to-scratch surface - Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Trapezoidal threads highly resistant to wear.
• Weight: 185 grams (without battery) or 258 grams (including battery).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Withstands recoil when used on a weapon without problems.
• Tactical tail switch (momentary on/off function).
• Included with the flashlight: ARB-L21-5000U battery, USB-C charging cable, wrist lanyard, belt holster, spare o-ring.
• The following accessories can be purchased: AER-05 cable switch, ALG-15 quick-release rail mount, ALG-00 quick-release rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 helmet mount, helmet mount, metal magnetic helmet mount, plastic magnetic helmet mount, scope mount, metal scope mount, Fenix ALD-05 helmet strap for helmet use.

Usage

From the factory, there might be an insulating cap inside the battery. Remove it before first use.

To turn on, press the main tactical button on the tail of the flashlight; for momentary activation, hold the button. By pressing the side toggle button, you can switch between output modes at any time during operation.

Switching light color - with the flashlight on, press and hold the toggle button; the light color will cycle through white – red – green. Release the button when the desired color is reached. The flashlight remembers the selected light color even after being turned off.

Strobe is activated only from the off state by pressing and holding the toggle button.

Low battery warning - if the battery voltage drops below the set level, the flashlight will reduce its brightness to a lower level until it reaches the lowest mode. Once the lowest output is reached, the flashlight will flash three times every 5 minutes to remind you to recharge or replace the battery.

Intelligent overheat protection - if the flashlight temperature exceeds 65°C, the output will automatically decrease. As soon as the temperature drops below 65°C, the highest output can be used again.

Notice

• Use only high-quality rechargeable 21700 Li-ion batteries with protection circuits.
• Insert batteries with the positive pole facing the head of the flashlight.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
• If the flashlight blinks, does not switch to higher output modes, or does not turn on, it could be due to one of the following reasons:
  
  • The battery is almost depleted - charge or replace it.
  • The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
  • The rear part of the flashlight is loose - tighten it.

Beam Distance: 640m
Max. Runtime: 29h
Output: 2500lm
Number of Modes: 9
Weight: 258g
Power Source: 1x 21700
Light Source: Luminus SFT-70
Waterproof: IP68 (2m submersible)