Fenix E05R rechargeable flashlight, brown
All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Fenix E05R flashlight parameters
- It uses a powerful XP-G2 S3 LED with a lifespan of 50,000 hours.
- Four output modes: BURST 400 lumens (while the button is held) -> 150 lumens (0.93 hours) -> 25 lumens (5 hours) -> 3 lumens (30 hours).
- Powered by a built-in 320 mAh Li-pol battery.
- Charging via micro-USB connector.
- Charging time for a completely discharged battery is approx. 1 hour.
- Overheating protection.
- Dimensions 6.8 cm (length) x 1.53 cm (head) x 1.5 cm (body).
- Weight 24 grams.
- Light beam with a range of 64 meters (1046 cd).
- Made of aircraft-grade hardened aluminum. Durable finish - Type III hard anodized.
- Impact resistant from a fall of 1 meter.
- Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
- The package includes a metal keychain ring, a spare O-ring seal, and a micro-USB cable.
Usage
Turning the flashlight on or off is done by holding the button for 0.5 seconds. Further short presses cycle through the lighting modes of 3 - 25 - 150 lumens. To activate the 400 lumens BURST mode, hold the button for more than 1.2 seconds. After releasing the button, the flashlight will switch to the last used lighting mode.The control button can be locked to prevent accidental activation, e.g., during transport in luggage. Press the control button twice quickly (within 0.5 seconds). The flashlight will flash twice in the lowest light mode, indicating it is locked. To unlock, press the button twice quickly again, the flashlight will flash twice again and is unlocked.
Overheating protection - due to the miniature size of the flashlight and high output in the highest modes, the flashlight will automatically reduce brightness once it exceeds 60 °C. After the temperature decreases, the highest modes can be reactivated.
Charging
Unscrew the waterproof nut covering the micro-USB connector. Then connect the charging cable to the USB port of a computer, a USB adapter, or a car charger. During charging, the indicator LED on the flashlight glows red, and when fully charged, it glows green. The standard charging time for a completely discharged flashlight is 1 hour.Notice
- Do not disassemble sealed parts yourself, as this will void the warranty.
- If the flashlight flashes or does not turn on, it may be due to one of the following reasons:
- The battery is discharged, please charge it.
Warranty
Two-year warranty.Beam distance: 64m
Max. runtime: 30h
Output: 400lm
Number of modes: 4
Weight: 24g
Power supply: USB charging
Power supply: Internal battery
Light source: Cree XP-G2
Waterproofness: IP68 (2m submersion)
| Colour | brown |
| Power supply type | micro USB |
| Battery type | rechargeable |
| Sport | hiking, camping |
| product ID | 198413 |
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































Pekné a kvalitné spracovanie. Poistka funguje správne baterka sa vo vrecku samovoľne nezapína čo pre mňa bolo dôležité.
Translate by GoogleShow the original