Mondraker Crafty R 29, black / white, model 2021
These goods are unavailable
Similar products
You can try these searches
Frame: Crafty 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150mm travel, Forward Geometry, internal removable battery with integrated alloy cover, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing , MAX capacity sealed bearings, oversize 17mm axles, integrated dropout speed sensor, exclusive plastic motor covers.
Fork: Fox 38 29 Float FIT GRIP EVOL Performance, 160mm, e-bike tuned, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload
Muffler: Fox Float DPX2 LV EVOL Performance, 205x65mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
Head composition: Onoff Saturn tapered for 1-1 / 8 to 1-1 / 2 head tube, ACB sealed bearings, top 41x30.2x7x45x45, bottom 51.9x40x8x45x45
Gearbox : Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1: 1
Gear: Sram Trigger NX Eagle, 12s, X-Actuation 1: 1, single click
Brake levers: Sram G2 R, tool-free reach adjust
Front brake: Sram G2 R, 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pads
Rear brake: Sram G2 R, 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pads
Cranks: Race Face Aeffect ebike, 165mm
Converter: Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
Handlebars: Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9 backsweep, 5 upsweep, 31.8mm barbore Onoff Desert, 1lock-on, 135mm, sizes: S / ML / XL
Stem: Onoff Sulfur FG 30mm 0, 6061 forged alloy, 31.8mm barbore
Seatpost : Onoff Pija dropper internal, diameter 31.6mm, S size: 387x125mm, M size: 425x150mm, L / XL size: 465x170mm
Saddle: SDG BEL-AIR 3.0, EVA foam, steel rails
Hub front: DT 370, Boost 15x110mm, IS 6 bolts
Rear hub: DT 370, Boost 12x148mm, 3 Pawl system, IS 6 bolts
Rims: DT Swiss H1900 Spline 29, 30mm internal width, sleeved aluminum, tubeless ready, 28 spokes
Tip: DT Hybrid SP, straightpull
Front tire: Maxxis Minion DHF 29x2.6, tubeless ready, 3C MAXX TERRA, EXO + Protection, 120TPI, folding bead
Rear tire: Maxxis Minion DHR II 29x2.6, tubeless ready, 3C MAXX TERRA, EXO + Protection, 120TPI, folding bead
Chain: Sram SX Eagle, 12s, Powerlock
Cassette: Sram PG-1210, 11-50T, 12p
Engine and battery: Bosch Performance Line CX Cruise (25Km / h) GEN4, Bosch Kiox computer, Bosch Powertube 625Wh
Product details
Battery | 625 Wh |
Drive | Bosch Performance CX |
Model year | 2021 |
Groupset | SRAM GX, SRAM NX, SRAM SX |
Gears | 1x12 |
Brakes | Hydraulic disc brakes |
Material | aluminium |
product ID | 129614 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews