Marin Alpine Trail E2 29/27.5 e-bike, light brown/black
Marin Alpine Trail E2 29/27.5 electric bike
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Shimano EP8
|
Battery |
BT-8036, Internal 630 Wh
|
Charger |
Shimano Battery Charger EC-E6002
|
Display |
SC-E8000 Display
|
Frame |
All New Series 4 Alloy Frame, 150 mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
Fork |
Fox 38 Performance Elite, 160 mm travel, 29" , 110x15 mm Boost Kabolt Thru-Axle, 44 mm Offset, Integrated Fox Fender
|
Rear shock |
Fox Float DPX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 2-Position Climb Switch, 205x65mm, Trunnion Upper Mount, 25mm x M8 Lower Mount
|
Shifting |
Shimano SLX 12-speed, I-Spec EV
|
Derailleur |
Shimano XT 12-Speed, SGS
|
Cassette |
Shimano SLX M7100 Cassette, 12-Speed, 10-51T
|
Chain |
KMC E12S, E-Bike Specific Chain
|
Cranks |
e13 e*Spec Plus Crank, 165 mm Length with e13 e*Spec DM Chainring 38T
|
Brakes |
F: Shimano SLX Hydraulic Disc, 203mm Rotor
R: Shimano SLX Hydraulic Disc, 203mm Rotor w/ Speed Sensor |
Brake levers |
Shimano SLX Levers, I-Spec EV
|
Rims |
F: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc, TLR
R: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc, TLR |
Hubs |
F: Shimano MT-410B, 110x15 mm, centerlock Disc, 32H
R: E-Bike Specific Design, 148x12 mm, Quad Sealed Bearings, Disc, 32H, Standard Freehub Body |
Spokes |
14g Black Stainless Steel
|
Tires |
F: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible
R: Maxxis Minion DHR II 27.5x2.8", 3C Maxx Terra, EXO+, Tubeless Compatible |
Seatpost |
X-Fusion Manic, 1x Composite Remote, Size S: 125 mm Travel, Size M and L: 150 mm Travel, Size XL: 170 mm Travel, 30.9 mm
|
Saddle |
Marin E-MTB Saddle
|
Stem |
Race Face Affect R 35, 50 mm length
|
Handlebars |
Race Face Affect R 35, 35 mm Clamp, 780 mm Width, 20 mm Rise, 5º Up, 8º Back
|
Grips |
Marin Single Clamp Locking
|
Headset |
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
Pedals |
Marin MTB Plastic
|
Control |
SW-E7000 Left Hand Switch for Assist Mode Change
|
Accessories |
e13 Plus Chainguide, Aluminum Plate
|
Product details
Sex | Men, Unisex |
Battery | 630 Wh |
Drive | Shimano STePS EP8 |
Model year | 2023 |
Groupset | Shimano XT, Shimano SLX |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | front: 29"/rear 27.5" |
Fork travel | 160 mm |
Material | aluminium |
Size | S, M, L, XL |
Colour | light brown/black |
Fork | Air |
Shock | Spring |
Rear travel | 150 mm |
product ID | 231536 |
MTB
Veľkosť | S | M | L | XL |
---|---|---|---|---|
Výška (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Veľkosť (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Výška (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews