Marin Alpine Trail E1 29/27.5 e-bike, red/black
MARIN Alpine Trail E1 29/27.5 electric bike
Alpine Trail E will take you further, faster and allow you to conquer the most aggressive trails, whether uphill or downhill.Specification
Drive |
Shimano STEPS E7000
|
Battery |
BT-8035, Internal 504Wh
|
Charger |
Shimano Battery Charger EC-E6002
|
Display |
SC-E7000 Display
|
Frame |
All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
Fork |
Rock Shock 35 Gold RL 29", Motion Control Damper, 160mm Travel, Maxle Stealth Axle, 44mm Offset
|
Rear shock |
Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
|
Rear derailleur |
Shimano Deore, Direct Attachment, 10-Speed
|
Cassette |
Shimano Deore 10-speed 11-46T
|
Chain |
KMC X-10E, Silver
|
Cranks |
Marin Forged Alloy 165mm Length, Narrow Wide 38T Chainring
|
Front brake |
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
|
Rear brake |
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor w/ Speed Sensor
|
Brake levers |
Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
|
Rims |
Front : Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible;
Rear : Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible |
Front hub |
Shimano MT-410B, 110x15mm, centerlock Disc, 32H
|
Rear hub |
Forged Alloy, E-Bike Specific Design, 148x12mm, Quad Sealed Bearings, Disc, 32H, Standard Freehub Body
|
Spokes |
14g Black Stainless Steel
|
Tires |
Front : Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible
Rear : Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible |
Seatpost |
TranzX YSP23J, 30.9mm, Travel S=125mm, M/L=150mm, XL=175mm
|
Saddle |
Marin E-MTB Saddle
|
Stem |
Marin 3D Forged Alloy, 35mm
|
Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
|
Grips |
Marin Single Clamp Locking
|
Headset |
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
Pedals |
Marin MTB Plastic
|
Shift levers |
Shimano Deore, I Spec EV, 10-Speed
|
Control |
SW-E7000 Left Hand Switch for Assist Mode Change
|
Accessories |
e13 Plus Chainguide, Aluminum Plate
|
Product details
Sex | Men, Unisex |
Battery | 500 Wh |
Drive | Shimano STePS E7000 |
Model year | 2022 |
Groupset | Other |
Gears | 1x10 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" front, 27.5" rear |
Fork travel | 160 mm |
Material | aluminium |
Size | S, M, L, XL |
Colour | red/black |
Fork | Air |
Shock | Spring |
Rear travel | 150 mm |
product ID | 144888 |
MTB
Veľkosť | S | M | L | XL |
---|---|---|---|---|
Výška (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Veľkosť (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Výška (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews