Cannondale Moterra NEO S1 29 electric bike, rally red
These goods are unavailable
Similar products
You can try these searches
Cannondale Moterra NEO S1 29 electric bike
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Shimano EP800
|
Battery type |
Shimano BT-E8360, 630 Wh
|
Display |
Shimano SC-EM800, Bluetooth enabled
|
Frame |
150mm travel, SmartForm C2 Alloy, Cannondale Tuned Suspension, removable downtube battery, internal cable routing, 148x12 mm thru-axle, post mount brake, tapered headtube
|
Frame |
150 mm travel, SmartForm C2 Alloy, Cannondale Tuned Suspension, removable downtube battery, internal cable routing, 148x12 mm thru-axle, post mount brake, tapered headtube
|
Fork |
RockShox Lyrik Select +, 150 mm, Solo Air, 15x110 mm stealth thru-axle, tapered steerer, 51 mm offset
|
Rear shock |
RockShox Deluxe Select +, DebonAir, 2-Pos mode adjust, adjustable rebound
|
Shifting |
Shimano SLX 12-Speed
|
Derailleur |
Shimano XT
|
Cassette |
Shimano Deore, Hyperglide, 10-51T, 12-speed
|
Chain |
Shimano M6100 Hyperglide, 12-speed
|
Cranks |
FSA E-Bike, 165 mm, Shimano 12-speed, 34T
|
Brakes |
Shimano SLX 4-piston hydraulic disc
|
Brake levers |
Shimano SLX hydraulic disc
|
Disc brakes |
RT64 rotors 203mm/203mm
|
Rims |
WTB ST i30 TCS, 32h, Tubeless ready
|
Front hub |
(F) Shimano MT400, 15x110 mm thru-axle
(R) Shimano MT400, 12x148mm thru-axle |
Spokes |
Stainless Steel, 14g
|
Tires |
(F) Maxxis Assegai, 29 x 2.6", 3C, EXO+, tubeless ready
(R) Maxxis DHR II, 29 x 2.6", 3C, EXO+, tubeless ready |
Seatpost |
Cannondale DownLow dropper, internal routing, 31.6, 125 mm (S), 150 mm (M-XL)
|
Saddle |
Cannondale Ergo XC
|
Stem |
Cannondale 3, 3D Forged 6061 Alloy, 1-1/8", 31.8, 7°
|
Handlebars |
Cannondale 3 Riser, 6061 Alloy, 15 mm rise, 8° sweep, 4° rise, 780 mm
|
Grips |
Fabric Funguy
|
Headset |
Integrated Sealed Bearing, Tapered
|
Product details
Sex | Men, Unisex |
Battery | 630 Wh |
Drive | Shimano STePS EP8 |
Model year | 2023 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Gears | 1x12 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 150 mm |
Material | aluminium |
Size | S, M, L, XL |
Colour | rally red |
Fork | Air |
Shock | Air |
Rear travel | 150 mm |
product ID | 213083 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews