Kellys Pedelec Lady, model 2020
Power unit: AIKEMA Front hub motor, 36V, 250W
Display: King-Meter LCD
Battery: PORTAPOWER capacity 8,7Ah / 313.2 Wh
Fork: steel rigid
Head composition: thread
Middle composition: torque sensor
Cranks: SAMOX AC-20 170mm
Gear: Sturmey Archer C30 Rotary
Number of transfers 3
Chain: SHIMANO Nexus
Brakes: TEKTRO V-brake
Brake levers: TEKTRO EL350-RS E-bike
Hubs: Sturmey Archer RS-RF3 36 holes
Rims: alloy 622x18
Tip: stainless steel
Tires : Cheng Shin Tires 40-622 (700x38C)
Stem: steel / alloy quill stem
Handlebars: steel RiseBar - diam 25.4mm / width 620mm
Grips: plastic dual density
Seatpost: alloy diam 30.8mm / length 250mm
Saddle: StoneFly
Pedals VP-607 Alloy
Headlight : SPANNINGA Kenio
Rear light SPANNINGA Duxo
Fenders: alloy black
Accessories: stand, bell, StoneFly carrier max 25kg, charger 1.35A
Model year | 2020 |
Gears | 1x3 |
Groupset | Other |
Material | aluminium |
Battery | 250 Wh |
Brakes | V-brakes |
product ID | 104570 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews