Muc-Off Ultimate Tubeless Setup Kit-Road tubeless kit, Presta valve 60 mm, 160 ml
The Muc-Off Ultimate Tubeless Kit contains everything you need to set up two wheels tubeless and ready to go.
Each kit contains: Muc-Off Tubeless Rim Tape (21mm x 10m), Seal Patches, 2x black CNC-machined tubeless valves and 2 pouches of Muc-Off No Puncture tubeless sealant.
Instructions for use:
1. Remove all old tape or rim tape and clean.
2. Ensure the rim is clean and dry before applying the tape.
3. Take the tape from the packet and align it on the opposite side of the valve.
4. Start by peeling off a small amount of tape and holding it down with your thumb or finger, keeping it taut.
5. Continue holding down as you peel the tape off and stick it down firmly, once you have a few cm of tape on the rim, the tape will stick by itself and holding is no longer required.
6. Continue all the way around the rim (if it has a large concave layer, you can pull the tape and stretch it to fill all the edges)
7. Overlap the tape by roughly 10 - 15 cm
8. Leave a small amount unpeeled so you can cut the rest off
9. After cutting the tape off and pulling the tape down, create a seal
10. Go around the rim with your thumb and ensure there are no air pockets or contaminated areas.
11. Once you are happy with how it looks, use a small sharp object to find the valve hole and cleanly puncture the tape ready for the valve
12. Grab your tubeless valve and remove the lock ring and O-ring
13. Choose the correct rubber grommet for the rim tape and insert the valve into the rim
14. Fit the O-ring and lock ring to secure the valve in place (do not overtighten, you could damage the rubber)
15. Re-fit the tyre of your choice, taking care not to damage the tape (using tyre levers etc.)
16. Inflate the tyre to seat the bead (you should hear popping around the rim)
17. Deflate the tyre and remove the valve core using the spare valve cap
18. Grab the sealant pouch and give it a good shake
19. Unscrew the cap and attach the valve to the valve in the upright position
20. While holding the pouch, rotate the wheel downwards so the pouch is now upside down
21. Insert the sealant by rolling the pouch downwards
22. Rotate the wheel back upright and remove the pouch
23. Re-insert the valve core and inflate to your pressure
| product ID | 221339 |
na aku sirku nafiku je to urcene?
Dobrý deň,
šírka dodávanej pásky je 21mm čiže ideál je ráfik s vnútornou šírkou 17mm. Teoreticky sa páska bude dať použiť aj na o pár mm širší ráfik ale bude potrebné dať viac vrstiev.
Čo odporúčate na trail/enduro bike so šírkou rafika 27mm?
Dobry den,
- paska: https://www.mtbiker.sk/shop/servis/pasky-do-rafiku/bezdusove-pasky/dt-swiss-tubeless-ready-paska-do-rafika-p102888.html - v sirke 32 mm.
- tmel: https://www.mtbiker.sk/shop/servis/tmely-a-lepidla/stans-notubes-bezdusovy-tmel-p283230.html
- ventily: https://www.mtbiker.sk/shop/plaste-a-duse/duse-ventilky-a-inserty/ventily/stans-notubes-universal-bezdusove-ventilky-galuskovy-ventil-44-mm-p136046.html
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Show info





























































