Mongoose Tyax 29 Comp, model 2020, orange
Fork: SR Suntour XCM, 29 ", steel steerer, hydraulic lockout, 9 mm x 100 mm, QR, 100 mm travel
Cranks: Prowheel Charm, aluminum, 30T
Gear: Shimano SLX SL-M7000
Cassette: Sunrace, 11-speed, 11-50T
Chain: KMC X11
Shimano SLX RD- M7000
Rims: WTB ST-i29, aluminum double wall, 29 mm ID, 32H, tubeless compatible
Hubs: Xposure, aluminum, ball bearing, 9 mm x 100 mm, 32H, 6-boltXposure, aluminum, ball bearing, 9 mm x 141 mm QR, 32H, 6-bolt
Pedals: Mongoose, nylon
Brakes: Tektro HD-M290, hydraulic, aluminum, 160 mm rotor
Stem: Xposure 3D forged aluminum, threadless, 60 mm / 70 mm, 6 °, 31.8 mm clamp
Head composition: Threadless, ZS44 / ZS56, retainer bearing
Handlebars: Xposure, double-butted aluminum, 740 mm width, 15 mm rise, 31.8 mm clamp
Tip: 14G, stainless steel
Tires : Kenda Kadre, 29 in x 2.20 in, wire bead
Saddle: Mongoose MTB, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mmbsp;
| Model year | 2020 |
| Gears | 1x11 |
| Groupset | Shimano SLX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 101453 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order the bike for in-person pickup or home delivery, it will be waiting for you fully assembled and inspected
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute; a 4 mm or 5 mm hex key is required).
- Mount front wheel to fork (1 minute, no tools required if the bike has a quick-release mechanism).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes; a 4 mm or 5 mm hex key is required).
- Mount the pedals to the crankset while lubricating the thread and carefully mounting it the right way (1 minute, an 8 mm hex key or a 15 mm adjustable wrench is required).
- Mount seat post to frame (10 seconds, no tools required if the frame has a quick-release mechanism).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, a pump is required).
- Check the tightening of hex keys and quick-releases (2 minutes; 4 mm and 5 mm hex keys required).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň, rád by som sa informoval či je možné tento bicykel zložiť vo veľkosti XL. Nakoľko mám výšku 195cm a prevedenie L by už bol pre mňa malá velkosť. Ďakujem za odpoveď.
Dobrý deň,
preverím u dodávateľa a dám Vám vedieť.
Dobrý deň,
bohužiaľ dodávateľ nevie termín ďalšieho naskladnenia.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Show info































































There are currently no reviews