FORCE MTB 26" fixed fork
FORCE MTB 26" fixed fork
| Colour | black shiny |
| Steerer tube | ahead 1 1/8" |
| Column length | 260 mm |
| Crown diameter | 50 mm |
| Brake assembly | disc and V-brakes |
| Leg length | 440 mm |
| Material | Al 6061 |
| Weight | 840 g |
| product ID | 12805 |
•
Is this compatible with a 26 x 2.30 tire?
•
Hello, it can be really tight - the manufacturer recommends to use max. 26x2,25" tire.
•
Hello, I would like to combine this fork with a mudguard https://www.mtbiker.sk/shop/prislusenstvo/blatniky/detske-a-univerzalne/force-blatniky-aluflex-26.html, could it be done.. ? Thank you for your response
Dobrý deň, chcel by som skombinovať túto vidlicu s blatníkom https://www.mtbiker.sk/shop/prislusenstvo/blatniky/detske-a-univerzalne/force-blatniky-aluflex-26.html, dalo by sa to zrealizovať..? Ďakujem za odpoveď
Show translationAutomatically translated
•
Dobrý deň,
vidlica má prípravu na úchyt blatníkov, takže áno, bude to možné.
•
dobry den sedela by tato vidlica na tento bicykel? : https://mestskybicykel.sk/obchod/mestske-bicykle/dema-alizee/
•
Dobrý deň,
áno bude sedieť.
•
Dobrý deň a asi bude treba vymenit aj hlavove zlozenie a predstavec? V podstate mi ide o to zhodit hmotnost toho bicykla...Dakujem
•
Len pre info, trebalo vymeniť aj hlavove zlozenie a predstavec
•
Could you please add to the description the distance from the axis to the head assembly? it is important to know if the fork can be used instead of a sprung one without spoiling the geometry.
Mohli by ste prosim doplnit do popisu vzdialenost od osky po hlavove zlozenie ? je to dolezity udaj ci sa da vidla pouzit namiesto odpruzenej bez pokazenia geometrie.
Show translationAutomatically translated
•
Dobry den,
je to cca 400 mm.
•
Hi,
You sell two 26" forks, but which one is matte and which one is glossy black?
It doesn't appear at this moment.
Can you fix it?
•
edit
HI ,I edited the description.
•
Good evening, I would like to ask if it is not by chance that you supply this fork only with the disc variant. Thank you very much
Dobry večer, chcel by som sa opytať či uplnou nahodou nedodavate tuto vidlicu iba s variantou na kotuč. Ďakujem pekne
Show translationAutomatically translated
•
Dobrý deň,
aktuálne je dostupné len takéto prevedenie. Prevedenie len pre kotúčovú brzdu by malo byť dostupné koncom Mája, v prípade záujmu sa nám teda ozvite neskôr.
•
Does this fork replace approx 100mm of travel? I.e. is it usable for HT MTB frames as a replacement for suspension?
Nahrádza táto vidlica cca 100 mm zdvihu? T. j. je použiteľná pre HT MTB rámy ako náhrada za odpruženú?
Show translationAutomatically translated
•
Presnu nahradu zdvihu vyrobca neuvadza ale bude to menej ako 100 mm. Cize treba ratat ze predok poklesne.
•
Hello, I would like to ask how wide a casing I can use with this fork.
well thank you
Dobrý deň, chcel by som sa opýtať aký široký plášť môžem použiť pri tejto vidlici.
Ďakujem
•
Dobrý deň,
preveríme s dodávateľom a budeme Vás informovať.
•
Dobrý deň,
výrobca tento údaj neuvádza, ale predpokladáme že do 2,10" by nemal byť problém.
•
Good evening, I want to ask how many millimeters is the diameter of the 1 1/8'' post.
Dobrý večer, chcem sa spítať že kolko je to milimetrov ten priemer stlpika 1 1/8´´.
Show translationAutomatically translated
•
Dobry den,
je to 28,5 mm
•
what is the current availability? Is it possible to order it? Thank you
aka je aktualna dostupnost? Je ju mozne objednat? Vdaka
Show translationAutomatically translated
•
Dobrý deň,
Dostupnosť preveríme u dodávateľa
•
Dobrý deň,
Vidlica by mala byť dostupná u dodávateľa po 22.10.2017
•
je vhodná aj pre trial street bike onza zoot 24 ?
•
Dobry den,
tuto vidlicu by som na dirt velm neodporucal...nie je urcena prilis na skakanie.
•
•
Dobrý deň,
Dĺžka stĺpika je 260 mm
•
I will add. I was dealing with a similar problem. A normal suspension fork (100mm travel) has a distance from the center of the axle to the bottom of the headstock of 480mm with a 26" wheel. (27.5" is 500 and 29" is 520mm) And this particular fork has this distance of 440mm...
Doplním. Riešil som podobný problém. Bežná odpruženie vidlica (100mm zdvih) má vzdialenosť od stredu osky po spodok hlavoveho 480mm pri 26" koleso. (27,5" je to 500 a 29" 520mm) A táto konkrétna vidlica má túto vzdialenosť 440mm ...
Show translationAutomatically translated
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale savings Shimano SM-AX56 E-Thru rear axle, 12x142 mm/171 mm
24.99 €
savings
RRP 35.99 €
-5% FORCE Eco fork steerer tube extender attachment, 1 1/8", 65 mm
9.49 €
-5%
RRP 11.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
nagyon szupi
Translate by GoogleShow the originalso far it looks good, I had a suspension fork with 80 mm travel, so it will go a bit higher, I haven't ridden it yet, the bike isn't assembled yet
zatiaľ vyzerá fajn, mal som odpruženu vidlicu 80 mm zdvih, tak pôjde to kus vyššie, ešte nejazdil som na ňom, neni ešte bicykel poskladaný
Show translationAutomatically translatedThe fork works for now, I mounted it on an old bike that I use to ride to work.
Vidlica zatiaľ slúži, namontoval som ju na starý bike, ktorý používam na jazdenie do práce.
Show translationAutomatically translatedSo far so good, but you have to take into account that the front will drop a little, it does not replace the 10 cm lift.
Zatiaľ fajn, treba ale rátať s tým, že predok trocha klesne, nenahradzuje 10 cm zdvih.
Show translationAutomatically translated