GHOST KATO 1 29 bicycle, black/white
GHOST KATO 1 29 bicycle
| Frame |
KATO 29 Alloy AL
|
| Fork |
RST Blaze MLO 100 mm
|
| Shifting |
Shimano SL-M310
|
| Derailleur |
Shimano Tourney TX 8-Speed
|
| Front derailleur |
Shimano Tourney
|
| Cassette |
Shimano CS-HG200 12-32
|
| Cranks |
Shimano FC-TY 501 42-34-24
|
| Brakes |
Tektro ACC 003 160 mm
|
| Saddle |
GHOST VL 1353
|
| Stem |
GHOST AS GH2 31.8 mm
|
| Handlebars |
GHOST Low Rizer 720 mm 31.8 mm
|
| Sex | Men, Unisex |
| Model year | 2017 |
| Gears | 3x8 |
| Colour | black |
| Material | aluminium |
| Wheel material | Aluminium |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Dropper post | no |
| Control type | mechanical |
| product ID | 30484 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Good day. I would be interested in size "L". If I collect the bike in person, is the bike set up and assembled at the store? Where do you live? Thank you
Dobry den. Mal by som zaujem o velkost "L". Pri osobnom odbere je nastavenie a poskladanie bicykla na predajni? Kde sidlite? Dakujem
Show translationAutomatically translated
Dobrý deň,
Záleží aký druh odberu si zvolíte. Pokiaľ to bude u nás v MTBIKER Centre v Hrádku tak bicykel Vám poskladáme a nastavíme u nás. Druhou možnosťou je odber v ProCycling v Bratislave kde Vám taktiež zabezpečíme poskladanie a nastavenie bicykla na predajni no v Bratislave. Treťou možnosťou je zaslanie bicykla kuriérom a v tom prípade bicykel taktiež poskladáme a nastavíme no s tým, že bicykel pred odoslaním zložíme do prepravnej krabice a po doručení bude potrebné z Vašej strany namontovať predné koleso, riadítka, sedlovku, pedále atď.
Tento bicykel žiaľ vo veľkosti L je už vypredaný a ani nebude. Na sklade u dodávateľa je ešte v tejto farebnej verzii https://www.mtbiker.sk/shop/bicykle/horske-bicykle/pevne-a-hardtail/ghost-kato-1-29-modra-zlta-horsky-bicykel-model-2017.html
Našu predajňu máme v Hrádku pri Piešťanoch https://www.mtbiker.sk/shop/informacie/centrum.html
All the answers to questions about delivery, payment, security, returns, warranty and much else.


































































There are currently no reviews