Giant Trance X 3 27.5 bike, good gray
Giant Trance X 3 27.5 bike
The Trance X is built on a high-quality ALUXX SL aluminum frame, which guarantees lightness.Flip Chip
Flip Chips are inserts located at the top of the rear suspension, where you can easily adjust the geometry suitable for your riding style.
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
| Frame |
ALUXX SL-Grade Aluminium front and rear triangles, 145 mm Maestro suspension, flip chip, 12x148 mm thru-axle
|
| Fork |
RockShox Yari RC, Motion Control, DebonAir, 37 mm offset, 160 mm, 15x110 Stealth, custom tuned for Giant
|
| Shock |
Fox Float DPS Performance, 185/55, custom tuned for Giant
|
| Shifting |
Shimano Deore, 1x12
|
| Derailleur |
Shimano Deore
|
| Cassette |
Shimano Deore, 10-51T
|
| Chain |
KMC X-12
|
| Cranks |
Praxis Cadet M24 HD, 32T
|
| Brakes |
Shimano Deore BR-MT420, hydraulic, Shimano RT-66 discs, front: 203 mm, rear: 180 mm
|
| Brake levers |
Shimano BL-MT401
|
| Rims |
Giant AM 27.5, alloy
|
| Hubs |
alloy, sealed bearing
|
| Spokes |
Sapim
|
| Tires |
front: Maxxis Assegai 27.5x2.6, 3C MaxxTerra, EXO, TR
rear: Maxxis Minion DHR II 27.5x2.6, 3C MaxxTerra, EXO, TR |
| Seat post |
Giant Contact Switch dropper, remote
|
| Stem |
Giant Contact SL 35
|
| Handlebars |
Giant Contact TR35, 800 mm wide x 35 mm wide, 20 mm rise
|
| Grips |
Giant Tactal Pro Single
|
| Bottom bracket |
Praxis, press fit
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano Deore |
| Colour | good gray |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 27.5" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 160 mm |
| Rear travel | 145 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| Max tire width | 2.6" |
| Max. the number of teeth of the converter | 34 |
| product ID | 155344 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.



































































There are currently no reviews