Shimano GRX FC-RX820-1 HTII crankset, 1x12, 40T
Shimano GRX FC-RX820-1 HTII Crankset
Gravel cycling has its rootsin simplicity, inclusivity and curiosity. Everyone, from beginners to seasoned veterans, relies on Shimano GRX, the first gravel-specific groupset - for smooth shifting, reliable braking and exceptional comfort on the terrain.| Groupset | Shimano GRX |
| Gears | 1x12 |
| Crank length | 170 mm, 172.5 mm, 175 mm |
| Material | Aluminium alloy |
| Chainring | 40T |
| Axis type | 24 mm (Shimano/FSA...) |
| Technical designation | FC-RX820-1-12 |
| Technology | HOLLOWTECH II |
| Chain line | 49.7 mm |
| Q-Factor | 151 mm |
| Spacing | 110 mm |
| Recommended chain | 12-speed HG |
| Package contents | right crank with axle and chainring, left crank, nut |
| Weight | 652 g (172.5 mm, 40T) |
| product ID | 244671 |
Variant Shimano GRX FC-RX820-1 HTII kľuky, 1x12, 42T
Zdravim, tento jednoprevodník pasuje len na holowtech ll? Mám stred lisovaný (pressfit).
Ďakujem.
Dobrý deň, aj PressFit stredy môžiu byť vhodné na Hollowtech II kľuky - Hollowtech II nie je označenie stredu, ale typu osky kľúk.
Pokiaľ máte stred určený pre 24 mm osky kľúk, tak kľuky budú sedieť.
Variant Shimano GRX FC-RX820-1 HTII kľuky, 1x12, 40T
Dobrý deň, potreboval by som tieto kľuky v 42z a dĺžke 170mm, budete ich mat v ponuke?
Dobry den, napisal som nasmu dodavatelovi a ozveme sa Vam mailom.
Variant Shimano GRX FC-RX820-1 HTII kľuky, 1x12, 40T
Dobrý deň
Potreboval by som 38z Prevodník kompatibilný s týmito kľukami.
Ďakujem.
Dobry den,
zial 38T mame dostupny len od Wolf Tooth - momentalne vsak uplne nedostupny - https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/wolf-tooth-110-bcd-4-bolt-prevodnik-pre-shimano-grx-38t-p173898.html.
Variant Shimano GRX FC-RX820-1 HTII kľuky, 1x12, 40T
Dobrý deň.
Bolo by možné na tieto kluky namontovať 38z prevodník z kľúk RX610?
Dobry den,
ano, prevodniky su navzajom kompatibilne.
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this “user's manual” before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be always followed in order to prevent personal injury, physical damage to equipment or damage to the surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could result in personal injury or physical damage to equipment or damage to the surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that there are no cracks in the crank arms. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful not to touch the gear teeth. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































Variant Shimano GRX FC-RX820-1 HTII kľuky, 1x12, 40T