Kellys Carson 30 28 bicycle, blue
Kellys Carson 30 28 bike
Frame |
KELLYS Tour Profile - internal routing, integrated kickstand mount
|
Fork |
SR SUNTOUR M3010, 50 mm, coil spring (threaded steerer)
|
Shifting |
SHIMANO ST-EF500-8 EZ-fire Plus
|
Derailleur |
SHIMANO Altus M310 (direct mount)
|
Derailleur |
SHIMANO TY710 (34.9 mm)
|
Cassette |
SHIMANO CS-HG200-8 (12-32T)
|
Chain |
KMC Z8 (114 articles)
|
Cranks |
SHIMANO TY301 (48x38x28T) - length 175 mm
|
Brakes |
APSE V-brake
|
Brake levers |
SHIMANO ST-EF500-8 EZ-fire Plus
|
Rims |
KLS Draft 622x21 (32 holes/riveted)
|
Hubs |
alloy (32 holes)
|
Spokes |
steel
|
Tires |
INNOVA 42-622 (700x42C)
|
Seat post |
sprung KALLOY - diam 30.9 mm/length 350 mm
|
Saddle |
KLS CrossLine
|
Stem |
adjustable KALLOY - diam 25.4 mm/bar bore 25.4 mm/length 100 mm
|
Handlebars |
steel RiseBar - diam 25.4 mm/rise 35 mm/width 630 mm
|
Grips |
KLS Wave 2Density ergonomic
|
Headset |
semi-integrated (threaded)
|
Bottom bracket |
cartridge
|
Pedals |
plastic
|
Mudguards |
RPZ
|
Front light |
LED battery
|
Rear light |
BÜCHEL Champs Elysees LED battery
|
Model year | 2022 |
Gears | 3x8 |
Groupset | Other |
Material | aluminium |
Brakes | V-brakes |
Fork | Spring |
Fork travel | 50 mm |
product ID | 177329 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews