Cannondale Super Six Evo Hi-Mod Disc Dura Ace 2018 SLV Road Bike Black-Green
These goods are unavailable
You can try these searches
Ballistec Hi-Modulus carbon frame and fork, Shimano Dura Ace 2x11 shifting, hydraulic disc brakes, Cannondale HollowGram Si Disc Carbon braided wheels, low weight, stiffness and aerodynamics.
Cannondale Supe Six Evo Hi-Mod Dura Ace Disc has a Ballistec Hi-Modulus frame. The Hi-Mod version uses a more sophisticated mix of long and ultra-long modulus fibers to create a stiff mesh that can reduce the overall weight of the entire frame to a minimum. The hi-mod fibers also deliver a livelier ride with better response and provide a better feel for the driving surface, so riding on the edge is under more control. At the same time, the frame is extremely comfortable thanks to the Speed Save system. Cannondale Super Six Evo Hi-Mod Dura Ace Disc is equipped with Shimano Dura Ace components in combination with 2x11 speed. The braking effect is ensured by hydraulic disc brakes, which are highly effective in any weather. Cannondale Hoolowgram Si cranks are created with 3D patented technology. The converters are fixed on a forged duralumin carrier and bring perfect rigidity and low weight. The frame is completed with Cannondale HollowGram Si Disc Carbon braided wheels. The system-integrated design makes the Super Six Evo Hi-Mod Dura Ace Disc a light, stiff, great-handling machine for true racers looking for extraordinary speed.
Model year: 2018
Frame: SuperSix EVO Disc, Ballistec Hi-MOD Carbon, Di2 Compatible, SPEED SAVE, PressFit BB30
Forks: New SuperSix EVO Disc, SPEED SAVE, Ballistec full carbon, 1-1/8 "to 1-1/4" steerer, integrated crown race, 100x12mm thru-axle
Handlebars : Cannondale HollowGram Si, BB30, w/ OPI Spidering, 50/34
Center composition: Cannondale Alloy PressFit30
Shifters : Shimano Dura-Ace R9120 hydro disc
Cassette: Shimano, 11-28, 11-speed
Chain: Shimano HG701, 11-speed
Derailleur: Shimano Dura-Ace 9100
Derailleur: Shimano Dura-Ace 9100
Hubs: Cannondale HollowGram Si Disc, Straight-pull wire mount, Front SRAM thru-axle 12x100 24 holes, Rear 135x9 quick release 28 holes, Center-lock disc mount
Pedals: N/A
Brakes: Shimano Dura-Ace R9170 hydro disc, flat mount, 160 / 140mm
Stem: Cannondale C1 Ultralight, 2014 Alloy, 31.8, 6 deg. w/integrated Garmin Mount
Headstock : SuperSix EVO, 1-1/4" lower bearing, 25mm carbon top cap
Brake levers: Shimano Dura-Ace R9120 hydro disc
Rims: Cannondale HollowGram Si Disc Carbon, Tire design, Width 19mm, Height 35mm, Tubeless preparation
Wires: DT Swiss Aerolite, straight pull
Tires: Vittoria Corsa, Kevlar bead, 700x25c
Saddle: Fizi: k Arione R5 w / K: ium Rail
Seatpost: Cannondale SAVE Carbon, 25.4x350mm (44-56), 400mm (58-63)
Color: Black
Handlebars: Cannondale C1 Ultralight, 7050 aluminum, Compact
Product details
Model year | 2018 |
Groupset | Shimano Dura-Ace |
Gears | 2x11 |
product ID | 55949 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews