Kellys Noid 70, model 2018
frame size M / L
fork ROCK SHOX Boxxer RC (27.5), 200mm, coil / Motion Control IS / Rapid Recovery / Maxle Lite DH 20mm thru axle
rear silencer ROCK SHOX Super Deluxe Coil R / Rapid Recovery (size 250x75mm)
main composition FSA 1.5 integrated
middle composition SHIMANO Press-Fit BB71-41A
cranks SHIMANO Zee M645 (34) - length 165mm
SHIMANO Zee SL-M640 Rapidfire Plus (rear)
SHIMANO Zee M640 converter (direct mount)
number of transfers 10
cassette pinion SHIMANO CS-HG500-10 (11-25)
chain KMC X10EL (106 links)
brakes SHIMANO Zee M640 Hydraulic Disc
SHIMANO brake discs front 203mm / rear 203mm
SHIMANO Zee BL-M640 brake levers
NOVATEC DH Disc hubs (20x110mm / 12x150mm / 32 holes)
fixed axle ROCK SHOX Maxle Lite DH front 20x110 / Mr. Control rear 12x150mm
rims KLS Brave Disc 584x23 (32 holes)
string stainless steel black
tires SCHWALBE Magic Mary 60-584 (27.5x2.35) folding - Tubeless Easy / SnakeSkin / Triple Star Compound
stem DH CNC - direct mount / bar bore 31.8mm / length 50mm
handlebars RACE FACE Respond RiseBar - diam 31.8mm / width 785mm
handles KLS Poison
seatpost RACE FACE Chester - diam 30.9mm / length 325mm
saddle KLS Styx
Model year | 2018 |
Gears | 1x10 |
Groupset | Shimano ZEE |
Material | carbon fiber |
product ID | 53836 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews