Fuji Auric 27.5 LT 1.1 Metallic Blue, model 2019
Fork: RockShox Lyrik RC 27.5 DebonAir, tapered alloy steerer, Boost 110x15mm, 170mm
Muffler: Rock Shox Super Deluxe RT3
Cranks: Truvativ Descendant, 32T
Middle composition: SRAM DUB, threaded
Derailleur: SRAM GX Eagle
Gearing: SRAM GX Eagle, 1 x 12-speed
Cassette: SRAM XG-1275, 10-50T
Chain: SRAM GX Eagle
Wheels: DT Swiss M1900 Spline 30 wheelset, 28H
Tires: Maxxis Minion DHF, 27.5 "" x 2.50 "" WT, 3C Max Terra, 60tpi, EXO, Tubeless Ready, folding, Maxxis Minion DHR II, 27.5 "" 2.40 "" WT, 3C Max Terra, 60tpi, EXO, Tubeless Ready, folding
Brakes: SRAM Code R, 200 / 180mm rotors
Brake levers: SRAM Code R
Head composition: FSA 1 1/8 "" - 1.5 "", sealed cartridge bearings
Handlebars: Race Face Aeffect R Riser Bar, alloy, 20mm rise, 780mm
Stem: Race Face Aeffect R, alloy, +6 degree rise
Grips: WTB Waffel, Lock on
Saddle: WTB Volt Comp
Seatpost: KS LEV SI dropper, 31.6mm, 15 "" - 125mm travel, 17, 19, 21 "" - 150mm travel, Southpaw Lever
Weight: 15.44 kg / 34.04 lbs
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM GX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 78105 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews