Lapierre Edge 3.7 27.5 bicycle, gray
Category: MTB HARDTAIL
Material: Aluminum
Wheel size: 27.5
Frame: Edge 27.5" Supreme 4 Alloy disc brake, intl cable routing
Fork: SR Suntour XCT30 -HLO-DS 27.5'' 100mm travel
Derailleur: Shimano Acera RDM360 8s
Cranks: Shimano TY301 42x34x24T 170mm (XS/S) 175mm (M/L/XL)
Center composition: SQUARE 124.5mm
Cassette: SUNRACE CSM400 8s 12-32T
Chain: S52 1/2"x 3/32" 8s
Brakes: Shimano MT200 hydraulic disc
Shifting: Shimao ALTUS STEF505 8s
Head composition: FSA NO.10 SEMI-INTEGRATED
Handlebars: XLC ALLOY 6061 W: 720mm R: 15mm Ø: 31.8mm
Grips: VELO DOUBLE DENSITY 130mm
Stem: XLC ALLOY Ø: 31.8mm L: 60mm R: 6°
Seatpost: XLC ALLOY Ø: 31.6mm L: 400mm
Saddle: XLC by DDK
Tire: Mitas Ocelot 27.5x2.1 584-54
Pedals: XERAMA SP-400
Derailleur: Shimano TOURNEY FDTY500
Wheels: Lapierre Disc 32H 27.5"/ 584-21c
Reel: Shimano SMRT10S 160mm Center Lock
Front fork lift: 100mm
Number of speeds: 3x8
Weight: 14.8 kg
Model year: 2022
Frame |
Edge 27.5" Supreme 4 Alloy disc brake, intl cable routing
|
Fork |
SR Suntour XCT30 -HLO-DS 27.5'' 100 mm travel
|
Shifting |
Shimao ALTUS STEF505 8s
|
Derailleur |
Shimano Tourney FDTY500
|
Cassette |
Sunrace CSM400 8s 12-32T
|
Chain |
S52 1/2"x 3/32" 8s
|
Cranks |
Shimano TY301 42x34x24T 170 mm (XS/S) 175 mm (M/L/XL)
|
Brakes |
Shimano MT200 Hydraulic Disc
|
Wheelset |
Lapierre Disc 32H 27.5"/ 584-21c
|
Seat post |
XLC ALLOY Ø: 31.6 mm L: 400 mm
|
Saddle |
XLC by DDK
|
Stem |
XLC ALLOY Ø: 31.8 mm L: 60 mm R:6°
|
Handlebars |
XLC ALLOY 6061 W: 720 mm R: 15 mm Ø: 31.8 mm
|
Grips |
VELO DOUBLE DENSITY 130 mm
|
Headset |
FSA No.10 SEMI-INTEGRATED
|
Bottom bracket |
SQUARE 124.5 mm
|
Pedals |
XERAMA SP-400
|
Derailleur |
SHIMANO ACERA RDM360 8s
|
Tires |
MITAS OCELOT 27.5x2.1 584-54
|
Brake disc rotor |
Shimano SMRT10S 160 mm Centre Lock
|
Fork travel |
100 mm
|
Number of speeds |
3x8
|
Model year | 2022 |
Model year | 2022 |
Gears | 3x8 |
Groupset | Shimano Acera, Shimano Altus, Shimano Tourney |
Weight | 14.8 kg |
Material | aluminium |
Brakes | Hydraulic disc brakes |
Fork | Spring |
product ID | 88241 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews