Lapierre EDGE 327, model 2018
Fork: SUNTOUR XCM-RL-DS-27.5 "" 100mm WITH REMOTE
Derailleur: SHIMANO ALIVIO RDM4000 9s SHADOW DESIGN
Derailleur: SHIMANO ACERA FDM3000
Cranks: SHIMANO FCMT200 40x30x22 170mm (XS, S) / 175mm (M, L, XL)
Middle composition: SHIMANO
Cassette: SHIMANO CSHG201 9s 11-36T
Chain: S9 S 9-SPEED
Brakes: SHIMANO BRM315
Wheels: SHIMANO SMRT30 180mm / 160mm CENTERLOCK
Gear: SHIMANO ALTUS SLM2000 3x9-SPEED
Head composition: FSA NO. 10 WS 50/44 1.6 TOP CAP
Handlebars: LAPIERRE MTB479A W: 720mm W: 15mm: 31.8mm
Grips: LAPIERRE by HERRMANS DD30B
Stem: LAPIERRE ST123A 7: 31.8mm L: 60mm (XS, S, M, L) / 75mm (XL)
Seatpost: LAPIERRE SP37.1: 27.2mm L: 350mm
Saddle: LAPIERRE by VELO
Front hub: SHIMANO HBTX505 32H CENTER LOCK
Rear hub: SHIMANO FHTX505 32H CENTER LOCK
Wheels: -
Rims: RODI FW DOUBLE WALL 27.5X19C DISC
Tires: 27.5X2.25 MICHELIN WILD GRIP'R (FRONT) 27.5X2.10 MICHELIN COUNTRY GRIP'R (REAR)
Accessories: FP-917
Model year | 2018 |
Gears | 3x9 |
Groupset | Shimano Alivio, Shimano Acera, Shimano Altus |
Material | aluminium |
product ID | 49717 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews