Kross Hexagon 2.0 27.5 bicycle, graphite/black/yellow
Check out other products in this category:
Hardtail mountain bikes Hardtail mountain bikes (Kross)Kross HEXAGON 2.0 27.5 bicycle
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
ALUMINIUM PERFORMANCE
|
Fork |
KROSS
|
Shifting |
Shimano EF41
|
Derailleur |
Shimano Altus M310
|
Derailleur |
SHIMANO TOURNEY TZ300
|
Cassette |
SHIMANO MF TZ500, 14-28T
|
Chain |
YBN S50
|
Cranks |
WHEEL TOP, 42T-34T-24T, 170 mm
|
Brakes |
V-BRZDA
|
Rims |
KROSS
|
Front hub |
GL-B01F-QR
|
Rear hub |
GL-B01R
|
Tires |
WANDA 27.5 x 2.1"
|
Seat post |
ALUMINUM 27.2 x 300 mm
|
Stem |
ALUMINUM 105 mm / 31.8 / 7 °
|
Handlebars |
ALUMINUM 660 mm 31.8
|
Grips |
HERRMANS
|
Bottom bracket |
FP-B902
|
Pedals |
FP-804
|
Sex | Men, Unisex |
Model year | unspecified |
Gears | 3x7 |
Groupset | Shimano Altus, Shimano Tourney |
Size | S |
Colour | graphite/black/yellow |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | V-brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 311406 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews