GT Zaskar LT 29 Comp bicycle, blue
GT Zaskar LT 29 Comp bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
Zaskar LT Alloy Frame, Triple Triangle™ Frame Construction feat. Floating Seatstays, BSA 73 mm, Boost 12x148 Thru-Axle, Tapered Head Tube
|
Fork |
SR Suntour XCR34 130 mm
|
Shifting |
MicroSHIFT Advent
|
Derailleur |
MicroShift Advent 10s
|
Cassette |
MicroShift 10s, 11-48T
|
Chain |
KMC X10
|
Cranks |
Prowheel Charm 30T
|
Brakes |
Tektro M275 hydro disc 180/180 mm
|
Rims |
WTB STX i25, 32h
|
Hubs |
Formula
|
Seatpost |
TranzX
|
Saddle |
GT MTB
|
Stem |
GT Alloy, 45 mm
|
Handlebars |
GT alloy, 780 mm
|
Grips |
GT MTB
|
Sex | Men, Unisex |
Model year | 2023 |
Groupset | microSHIFT ADVENT |
Gears | 1x10 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 130 mm |
Material | aluminium |
Colour | blue |
Fork | Spring |
Wheel material | Aluminium |
Telescopic seat post | yes |
product ID | 248856 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
