GT Aggressor Expert 2018 red mountain bike
27.5 "wheels, duralumin frame, 3x8 speeds, sprung fork with a stroke of 80 mm, hydraulic disc brakes.
The GT Aggressor Expert 27.5 mountain bike, which excels in easy handling thanks to its 27.5 "wheels. It is built on a duralumin frame with progressive geometry, which also contributes to good handling. The mountain bike is equipped with Shimano components with 3x8 speeds. GT Aggressor Expert 27.5 is a mountain bike that will bring you real driving pleasure and thanks to which you will really enjoy the ride. you will feel safe both in the field and on paved sidewalks.
Frame: Aggressor 27.5, Triple Tringle Frame, aluminum
Fork: All Terra CH-525, 80 mm stroke, 1-1 / 8 "post, spring, preparation for disc brakes
Cranks: All-Terra Forged Alloy 42/34 / 24T
Middle composition: encapsulated
Gear levers: Shimano SL-EF505, 8 speeds
Cassette: Sunrace, 11-34T, 8 speeds
Chain: KMC Z72
Derailleur: Shimano TY500
Derailleur: Shimano Acera, RD-M360
Rims: aluminum, double-walled 27.5 '', 32 holes, for disc brakes
Hubs: front Alloy QR, rear Alloy Freewheel QR
Pedals: GT Slim Line Flat Nylon Pedal
Brakes: Shimano hydraulic disc
Stem: Aluminum, Ahead, 10 ° pitch, 31.8 mm clamp
Head composition: 1 1/8 "Ahead
Handlebars: Aluminum, 620 mm wide, 25.4mm
Brake levers: Shimano hydraulic
Wires: Stainless steel 14G
Tires : All Terra Cypher 27.5X2.10 "
Saddle: All Terra MTB
Seatpost: Aluminum, 25.4
Model year | 2018 |
Gears | 3x8 |
Groupset | Shimano Acera |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 50765 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews