Kellys Whip 30 DJ 26 bike, graphite grey
Kellys Whip 30 DJ 26 bike
| Frame |
KELLYS Dirt DJ 26", tapered HT, single-speed
|
| Fork |
RST Omega T (26"), 100 mm, coil spring
|
| Chain |
KMC Z1 (86 links)
|
| Crankset |
Samox (32T) - length 170 mm
|
| Brakes |
Mechanical Disc
|
| Brake levers |
Tektro
|
| Brake discs |
rear 160 mm
|
| Rims |
KLS Asesino 30 Disc 559x30 (32 holes)
|
| Hubs |
KT Disc single-speed (32 holes)
|
| Spokes |
stainless steel black
|
| Tires |
KENDA Small Block Eight 58-559 (26x2.35")
|
| Seat post |
BMX Pivotal - diam 30.9 mm / length 200 mm
|
| Saddle |
BMX Pivotal
|
| Stem |
KLS CNC - diam 28.6 mm / bar bore 35 mm / length 35 mm
|
| Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 760 mm
|
| Grips |
kraton
|
| Headset |
semi-integrated
|
| Bottom bracket |
Samox cartridge
|
| Pedals |
plastic platform
|
| Pinion |
single speed 15T
|
| Sex | Men, Unisex |
| Model year | 2025 |
| Gears | 1x1 |
| Groupset | Other |
| Colour | graphite grey |
| Material | aluminium |
| Wheel diameter | 26" |
| Brakes | Mechanical disc brakes |
| Fork | Spring |
| product ID | 330479 |
| Bike size | M | L |
|---|---|---|
| Height (cm) | < 175 cm | 175 - 190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
