Superior RX 530, model 2019
Number of gears 3x8
Frame Alu 6061.T6
SR Suntour NEX HLO fork
Coil spring / hydraulic lock -out suspension system
Stroke 63mm
Head assembly VP-A77-CK1 SLIMSTAK 1-1 / 8 "
Middle composition Shimano BB-UN100, 73x122.5mm
Stem ONE Sport XC
Alloy rised handlebars
Seatpost ONE Sport XC 27.2mm
Grips Velo VL-G1777D2
Saddle Selle Royal Essenza
Brakes Tektro BR-855 V-brake
Shimano ST-EF65 EZ Fire Plus gear
Shimano FD- TY710 derailleur
Shimano Deore RD-M591 SGS derailleur
Cranks Shimano FC-TY701 48/38 / 28T
Shimano HG31-8 11-32T cassette
KMC Z51 chain
Shimano HB-TX500 QR front hub
Shimano FH-TX500 QR rear hub
Rims ONE J19SZ 32H
SAPI Galvanized wires
Tires IMPAC CrossPac 700x35C
MARWI SP-813 Non-Slip pedals
Weight 13.5 kg
Model year | 2019 |
Gears | 3x8 |
Groupset | Shimano Deore |
Material | aluminium |
Brakes | V-brakes |
product ID | 81012 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews