Marin San Rafael DS2 28 bike, gray/blue
Choose personal collection at the store and decide on the spot.
Marin San Rafael DS2 28 bike
Suitable not only for commuting, but also for occasional trips outside the city of a sports/recreational spirit. Enjoy cycle paths and paved roads during the weekend. If you want to ride frequently, you will need to do more fine-tuning.
Frame |
Series 2 Dual Sport, 6061 Aluminum, 700C Wheels, Disc Brake
|
Fork |
SR Suntour NEX Disc HLO, 63 mm Travel, Hydraulic Lockout, Preload Adjustment
|
Shifting |
Shimano Altus SL-M315, 8-Speed
|
Derailleur |
Shimano Acera 8-Speed
|
Front derailleur |
Shimano FD-TY710
|
Cassette |
SunRace 8-Speed, 11-34T
|
Chain |
KMC Z8
|
Cranks |
Forged Alloy Crank, 46/30T, Ring Guard
|
Brakes |
Tektro HD-M275 Hydraulic Disc, 160/160 mm Rotor
|
Brake levers |
Tektro Hydraulic
|
Rims |
Marin Aluminum Double Wall, Disc Specific
|
Hubs |
Forged Aluminum Alloy, Disc, 32H
|
Spokes |
14g Black Stainless Steel
|
Tires |
Vee Tire, Rail, 700x40, Wire Bead
|
Seat post |
Marin Alloy, 27.2 mm
|
Seat post |
Marin Fitness Plush
|
Stem |
Marin Alloy, 31.8 mm Clamp
|
Handlebars |
Marine Alloy Riser
|
Grips |
Marin Ergonomic Locking
|
Headset |
FSA No.10-P
|
Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
Pedals |
Dual Sport Platform
|
Sex | Men, Unisex |
Model year | 2021 |
Groupset | Shimano Acera, Shimano Altus |
Gears | 2x8 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 28" |
Fork travel | 63 mm |
Material | aluminium |
Size | S, M, L, XL |
Colour | grey/blue |
Fork | Spring |
product ID | 144970 |
MTB
Veľkosť | S | M | L | XL |
---|---|---|---|---|
Výška (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Veľkosť (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Výška (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews