Lapierre SHAPER 300, model 2017
Frame: SHAPER ALLOY SUPREME 4
Fork: LAPIERRE SHAPER CARBON - Alloy Steerer
Derailleur: SHIMANO TIAGRA FD4703BL 34.9mm
Derailleur: SHIMANO TIAGRA RD4700GS 10-Speed
Converter: SHIMANO TIAGRA FC4703CX090 50x39x30 170mm (S) / 172.5mm (M, L) / 175mm (XL)
Middle composition: SHIMANO BBRS500
Cartridge: SHIMANO CSHG50010132 - 10-Speed 11-32T
Brakes: SHIMANO BR451 / SHIMANO BLR 550
Gear: SHIMANO TIAGRA SL4703 3x10-Speed
Head composition: CH-9283TEBW 1.1 / 8 ''
Handlebars: LAPIERRE HB-FB11L Ø: 31.8mm W: 620mm
Stem: LAPIERRE ADJUSTABLE AS7AD L: 90mm
Seatpost: LAPIERRE SP-3D1 Ø: 31.6mm L: 350mm
Saddle: SELLE ROYAL SHADOW ROYAL GEL
Wheels and hubs: SHIMANO HB2400 CLARIS 32H - SHIMANO FH2400 CLARIS 32H - MACH1 CFX 700 32H
Tires: MICHELIN DYNAMIC SPORT 700x28c
Model year | 2017 |
Gears | 3x10 |
Groupset | Shimano Tiagra |
product ID | 49793 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews